Tag: bushings

Additional Headlight Bushing Replacement Info 1988 Corvette

Following the tech tip from Jeff Loftis, I found these two circumstances to be true for my 1988. I don\’t know if this will apply to other model years. 1) One of the two torx bolts holding the headlight motor to the frame is blocked by another part of the headlight bracket assembly. Theres is […] More »

  Comments | By - April 21, 2010

Headlight Motor Repair and Bushing Replacement

Headlight Motor Repair Procedure The following instructions detail the repairing of the headlight motors for the C4, using Tools Needed: 1/4\” drive 10mm socket 1/4\” drive 13mm socket 1/4\” drive Torx #30 Nutdriver with 1/4\” socket Hammer Pliers Small punch Awl or sharp nail Truarc snap ring pliers Materials Needed: WD-40 Hand Cleaner Grease Parts […] More »

  Comments | By - April 21, 2010

A-Arm Bushing Press-Replacement Poly

I was replacing my bushings with Energy Suspensions Hyperflex Kit 84-95vette.When you install the new one piece bushing for the upper a-arm they show you a diagram using an arbor press and how to place them on the rod that runs through them. The one side is two piece and easy to do. The opposite […] More »

  Comments | By - April 21, 2010