Tag: C4

Antenna Bypass Switch 1984-96 My car 1992 A4 Coupe Materials List 1- Toggle switch 2- Crimp connectors (for switch) 8 ft of 16 ga. wire 2- 16 ga. butt connectors (blue) Heat shrink tube I got all this stuff for less than 10 dollars Remove or Disconnect Battery Pass seat & base Console door Console […] More »

Let me start off by saying that this is very frustrating to do the first time around. Don\’t worry, and don\’t lose your cool. I did this on my 1994 coupe. It took me around four hours because I didn\’t know what I was doing and the other set of instructions didn\’t detail how to […] More »

This was my first time removing an automatic transmission from a Vette so I thought I\’d share the experience. First off, you\’ll need to get the car elevated. I managed to pull this off with the car on jack stands and less than 13 inches of clearance. Don\’t even think about reinstalling the tranny without […] More »

For those of you experiencing difficulty with the 1 to 4 shift lock-out, or for those of you who wish to experience shifting through all your six gears, here is a simple fix: on the passenger side, just in front of the fire wall, and mounted on the fender well, is a relay, that when […] More »

I\’ve found that \”Goof Off\”, a great gum/tar and other stuff liquid remover is also great at renewing those faded C4 door handles. It can be found in most hardwares, Walmart, Home Dept, etc. Comes in a small 4.5oz can with a squirt top. Squirt a little on a soft cotton cloth (just enough to […] More »

Thanks to TomH91 for the tip (and promise that it would work). I replaced my front hub bearings with 1994 Firebird parts. Why? Cuz the SKF bearings are in stock at Pep Boys for $109 and the vette parts have disappeared at prices below $200. What\’s the difference? Hardly anything. The Firebird flange that bolts […] More »

I was replacing my bushings with Energy Suspensions Hyperflex Kit 84-95vette.When you install the new one piece bushing for the upper a-arm they show you a diagram using an arbor press and how to place them on the rod that runs through them. The one side is two piece and easy to do. The opposite […] More »