Changing the oil in your C5 Corvette Items Needed:Oil (Check your owners manual for the proper amount and type)Oil Filter (If your manual doesn’t tell you a filter size, check your local parts store)Floor JackRampsJack StandsCatch PanPaper TowelsWrench or Socket Set for the oil plugOil Filter Wrench (Not needed, but it can be helpful)

*** NO GUARANTEE WHATSOEVER TO ANY DAMAGE DERIVED FROM THE USE OF INSTALLATION INSTRUCTIONS *** Step 0: Inventory Things you will need: Clothes Bar from Advance Auto Part � Stock # PA 6013317 ($5.99 + tax) Flat Punched 1/18� Thick 1-3/8� x 38� Zinc Plated from Home Depot P# 30699-18040 ($2.49) 2 sets of 5/16� […]

I have installed two sets of Melrose LT headers in C5\’s. These go in with minimum hassel and work great. To finish the job you need the following items: One 3\” \’U\’ bend. Four 3\” header flanges Any decent 110 MIG welder w/mixed gas (use nothing larger than .022 MIG wire). Skill saw w/ abrasive […]

This document should be used as a General “Guideline” as there are numerous things that can affect these instructions: 1)The type of C5 being tubbed (ie. Coupe, Hardtop, Convertible), 2)The type of fiberglass being used, 3)The type resin being used, 4)The type of tools available WARNING: Anyone attempting to tub their Corvette by following these […]

Step 1 1. Remove the upper stabilizer bolt and the lower stabilizer nut. Remove stabilizer bar from mount and swing down. Tools required: 18mm socket, 15mm wrench Step 2 2. Remove the muffler support brackets. Tools required: 13mm socket with extension Step 3 3. Remove the 4 bolts that attach the left and right muffler […]