C5 Removable Roof Adjustment
This is what worked for me, it differs from GM\’s official instructions. This is for a minor adjustment and assumes a course adjustment has already been made. This may be different for a 2000 or later. You\’ll need a 2mm Allen wrench and a T30 Torx driver. If you have an old roof which is […] More »
Download in Word format Tools required: – Floor Jack – Jack Stands (2) – Wheel Blocks – Hog ring Pliers or Needle nose Pliers – Hacksaw or Serrated Knife – 10mm Ratcheting Wrench or 10mm Socket Wrench w/swivel extension – 18mm Combination Wrench or 18mm Socket Wrench – 13/16\” Combination Wrench or 13/16\” Deep Socket […] More »
Please note: I installed a C5 rolled exhaust plate from Xtreme Motorsports. I am confident that this tech tip will work for others as well, but check measurments first to be sure. Sorry there are no pics, my sister borrowed my digital camera. One other tip: Don\’t say to yourself \”this would be a great […] More »
8-19-01 How to lower the front of your Z06 LOWER than just tightening the front bolts will allow… First step, make sure the car is jacked up securely, you put on the parking break, and you block the rear tires. Pull of the wheel and get ready to work. It makes the job easier if […] More »
There is a opening at the lower bearing where you can inject lithium grease. This will eliminate the rubbing or squeaking noise when the steering wheel is turned.