Tag: electronics

Installing a Custom Eprom

The engine in my 93 is basically stock, and I do not foresee my going into the motor in the near future. The main reason I wanted to change the Eprom was to lower the temperature at which the cooling fans turned on, I did not like the factory setting of 226�, and to raise […] More »

  Comments | By - April 21, 2010

PIAA Light Installation in a Z06

Here’s how to install PIAA fog lights on a Z06 using OEM hardware. This tip should also work on a FRC as well. Parts list: 2- bolts part # 11514623 2- nuts part# 10281487 1- switch part# 12135155 1- lt fog lamp part# 10438855 1- rt fog lamp part# 10438856 You may want to fabricate […] More »

  Comments | By - April 21, 2010

PKE How To Program Transmitter

1. Place transmitter and any optional transmitter 10 feet or more away from the car. 2. Turn the ignition key to the ON position. 3. Push the TRIP/ODO button on the DIC twice. 4. Within 5 Seconds, push and hold the FUEL/INFO button on the DIC until the PKE light on the DIC comes on […] More »

  Comments | By - April 21, 2010

  1. 1
  2. 2
  3. 3
  4. 4