Tag: exhaust

C5 Exhaust Install

Step 1 1. Remove the upper stabilizer bolt and the lower stabilizer nut. Remove stabilizer bar from mount and swing down. Tools required: 18mm socket, 15mm wrench Step 2 2. Remove the muffler support brackets. Tools required: 13mm socket with extension Step 3 3. Remove the 4 bolts that attach the left and right muffler […] More »

  Comments | By - April 21, 2010

C5 Rolled Exhaust Plate Install

Please note: I installed a C5 rolled exhaust plate from Xtreme Motorsports. I am confident that this tech tip will work for others as well, but check measurments first to be sure. Sorry there are no pics, my sister borrowed my digital camera. One other tip: Don\’t say to yourself \”this would be a great […] More »

  Comments | By - April 21, 2010

Corsa Install

The stock Corvette exhaust system works well and sounds pretty good. Actually, it’s sounds polite and politically correct. From my first test drive, I thought that the exhaust note was a little weak, even under wide open throttle. Heck, my Mustang’s stock exhaust (gasp!) had more grunt. Not being a civilized type of person, I […] More »

  Comments | By - April 21, 2010

How to Build a Custom Exhaust

SLP Engineering makes an exhaust system called the Loudmouth, which is basically a rear section with no mufflers. While I like the idea, I really don\’t like the tips that come on it, and I also really didn\’t feel like spending $500+ for something I could build myself. So I decided to build my own […] More »

  Comments | By - April 21, 2010

Chevrolet Corvette Exhaust Manifold Guide

The exhaust manifold in your Chevrolet Corvette will most likely be constructed of cast iron or stainless steel. The job of the exhaust manifold is to collect the gases vented by your Corvette engine’s multiple cylinders, and collect it into one pipe, the exhaust pipe. A particular kind of manifold, a header (extractor in Australia), […] More »

  Comments | By - September 23, 2009

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6