Tag: exhaust

C4 Exhaust Manifold Stud Removal and 3 Stud Bracket Fix

My 1985 Z-51 probably hadn\’t had the exhaust system out in 10 years. Needless to say, the exhaust header studs were rusted a bit and weakened by the years of heat. All the nuts came off except for one which snapped. The studs that were still there were bent – they seemed to be made […] More »

  Comments | By - April 21, 2010

C4 Exhaust Resonance Tips

After battling with 3 different cat back systems, and 3 different front Y pipes on my mostly stock 1990 corvette coupe, I have learned that the C4 corvettes can and often do have a exhaust resonance (droan) problem. After researching the matter and doing a lot of switching, installing, and reinstalling system after system I […] More »

  Comments | By - April 21, 2010

C5 Exhaust Install

Step 1 1. Remove the upper stabilizer bolt and the lower stabilizer nut. Remove stabilizer bar from mount and swing down. Tools required: 18mm socket, 15mm wrench Step 2 2. Remove the muffler support brackets. Tools required: 13mm socket with extension Step 3 3. Remove the 4 bolts that attach the left and right muffler […] More »

  Comments | By - April 21, 2010

Chevrolet Corvette Exhaust Manifold Guide

The exhaust manifold in your Chevrolet Corvette will most likely be constructed of cast iron or stainless steel. The job of the exhaust manifold is to collect the gases vented by your Corvette engine’s multiple cylinders, and collect it into one pipe, the exhaust pipe. A particular kind of manifold, a header (extractor in Australia), […] More »

  Comments | By - September 23, 2009

Chevrolet Corvette Exhaust Tip Guide

Somehow when you see an exhaust tip on a Chevrolet Corvette, you know the owner at least cares.

  Comments | By - September 23, 2009

  1. 1
  2. ...
  3. 3
  4. 4
  5. 5
  6. 6