Tag: intake

Tech Tuesday: C6 Intake

intake

Intake Why Mod? Modifying your intake, or cold air intake, is a relatively inexpensive, easy way to gain some horsepower. Make no mistake, this will not result in 50% more horsepower, at best around 5%. But it doesn’t cost too much (most complete intake systems cost less than $500) and can be a fun, quick […] More »

  Comments | By - December 31, 2013

Tech Thursday: C5 Intake

intake620x260

Intake Why Mod? Modifying your intake, or cold air intake, is a relatively inexpensive, easy way to gain some horsepower. Make no mistake, this will not result in 50% more horsepower, at best around 5%. But it doesn’t cost too much (most complete intake systems cost less than $500) and can be a fun, quick […] More »

  Comments | By - October 3, 2013

Tech Thursday: C6 Intake K&N install

intake

Intake Why Mod? Modifying your intake, or cold air intake, is a relatively inexpensive, easy way to gain some horsepower. Make no mistake, this will not result in 50% more horsepower, at best around 5%. But it doesn’t cost too much (most complete intake systems cost less than $500) and can be a fun, quick […] More »

  Comments | By - September 12, 2013

Breathing Easy: 1CoolC2’s Gorgeous Custom Intake!

There are plenty of classics which look like the last stop on their assembly line was a time machine. And without question, they’re gorgeous. But properly fusing past and present can be even trickier and 1CoolC2 has totally pulled it off with his ’67 C2. In addition to swapping the original mill for an LS7, […] More »

  Comments | By - August 5, 2011

ProFlow Install

The Pro Flow+ came with everything needed in one big box. The ABS shroud is OEM quality with a textured finish and smooth rounded edges. The instructions are excellent and even include a template for cutting your radiator shroud. The kit also includes a K&N filter, recharge kit and all the clamps and screws needed. […] More »

  Comments | By - April 21, 2010

  1. 1
  2. 2