Ecklers Part # 38171 $25.99 Hardware not included For reference, this part will be called the extinguisher This part will be called the mount Required Tools Drill. A hand drill will work, you are only going through fiberglass. 1/4 inch drill bit 2 wrenches of whichever size bolts/nuts you use This is possibly the most […]

This tip provides additional information to the Tech Tip “FIXING YOUR C4 SPORT SEAT LUMBAR SUPPORT” authored by Bob Thibodeau on 6/15/2001. 1. An alternative source for material to replace the ruptured diaphragm is a bicycle inner tube. It is much thicker than the original diaphragm, and should provide longer “life”. To prepare the tube, […]

Parts: None (hopefully) Estimate time: 10 minutes per side. Tools Needed: Phillips Screwdriver, Loctite, Dielectric Silicon Preliminary Information: The mirrors are held to the adjusting motor by a small �+� shaped piece called a pinion. The pinion attaches to retainers on both mirror and motor. There are two threaded rods attached to the mirror, one […]

This page describes the replacement of the passenger side “breadbox” on a 1987 Corvette Coupe. The breadbox is being replaced with a kit from Mid-America Designs. There are several other kits that I have seen. One has a map pocket in the front. Another has what looks like the breadbox but has a small glovebox […]