Tag: interior

Ripper Install

The stock shifter on the C5 Corvette is pretty good. It’s has a pretty short throw and it feels comfortable and tight. With that in mind, it’s obvious that there is plenty of room for improvement. The stock shifter does not have a strong positive centering mechanism. It’s throw is longer than it needs to […] More »

  Comments | By - April 21, 2010

C4 Bose Amp Fix

First, let me qualify this post: This fix is for most BOSE amp boards in C4 Corvettes. If your amp board doesn\’t look similar to the one shown below, yer outta luck. From my experience (and that of others) I give this fix a 70% success rating. I CAN\’T POSSIBLY GUARANTEE THIS WILL FIX ALL […] More »

  Comments | By - April 21, 2010

Step by Step Shift Knob Install on a 2000 Corvette Coupe

Here is a how-to primer for installing a shift knob on a C5 Corvette. The knob used in this example is the Phantom Shift Knob with the Kung-Fu… er… Pistol Grip and C5 logo available from Mid America Designs. The cost was $49.95 less 15% since it was ordered at Chevy Vette Fest in Chicago […] More »

  Comments | By - April 21, 2010

Electronic Climate Control Intermittent

After trying the two ideas mentioned in the other article on this subject, my ECC still was blinking on and off. A friend of mine and I got curious, so we took the printed board off of the faceplate, and the solder was cracked on the inside of the faceplate. We simply touched a hot […] More »

  Comments | By - April 21, 2010

Sun Visor Removal Instructions

The first picture shows the driver’s side, “Start to remove”, position. The visor is down like you would put it, to block the sun from coming in the windshield. Stick the correct size screwdriver into the slot, on the bezel ring, as shown. Rotate the sun visor counterclockwise, towards the driver’s side window. When you […] More »

  Comments | By - April 21, 2010

  1. 1
  2. ...
  3. 6
  4. 7
  5. 8
  6. 9
  7. 10