1. Pulling on the steering wheel clockwise with the key in the off position. 2. And then while still pulling in the same direction (clockwise), clicked the key to ON. Notes: I got this tip from \”cjones\”. Is worked like a charm on my car. Cheers -Tuan
There is a opening at the lower bearing where you can inject lithium grease. This will eliminate the rubbing or squeaking noise when the steering wheel is turned.
>>LT1 P/S Failure Overview: The previous owner of my car had 2 types of recurring, very frustrating failures of a \’93 LT1. This resulted in DNF\’s and mandatory trailering after about 12 of 24 road track events. We battled these issues by installing fresh factory and aftermarket parts. This was fruitless. Special SCCA Trans Am […]
While waiting for my car to be serviced (oil/filter change), I noticed a Red 99 or 00 C5 (6-Speed )coming in on a flat-bed tow truck. As I suspected it was being transported to the dealership for a Column Lock failure. The tow drive unloaded the locked up car right in front of me and […]