So it's not numbers matching, do I keep original parts?
#1
So it's not numbers matching, do I keep original parts?
I am the proud new owner of a 75. I plan to drive it and am not planning making it a show car or a pure original. I pulled the engine yesterday to update the cam and heads. It was fun because I didn't know what I would find. So here it is, the block had been decked and bored, cam replaced. I can't read the vin numbers anymore. The cast on the block and head numbers are "correct." The new cam was a blueprint by crane of an l48. I thought I had ruled out original block because it was painted blue until I found orange under the blue paint. Block cast date is actually May 25 1971.
So this was all fun figuring out but the question is, should I keep the heads, cam, and other parts I am removing or is this car eternally an outcast in the collector world and I should get them out of my garage?
So this was all fun figuring out but the question is, should I keep the heads, cam, and other parts I am removing or is this car eternally an outcast in the collector world and I should get them out of my garage?
#3
Team Owner
Member Since: Sep 2006
Location: Westminster Maryland
Posts: 30,173
Likes: 0
Received 2,878 Likes
on
2,515 Posts
Hi r75,
I agree, if you have the room to store the parts you should keep them.
They just might be of interest to one of the future owners of your car.
The fact that the pad surface has been 'decked' doesn't mean the engine isn't, or might not be, original to your car, and that's a good thing even though you're doing some modifications.
Regards,
Alan
I agree, if you have the room to store the parts you should keep them.
They just might be of interest to one of the future owners of your car.
The fact that the pad surface has been 'decked' doesn't mean the engine isn't, or might not be, original to your car, and that's a good thing even though you're doing some modifications.
Regards,
Alan
#5
Le Mans Master
#7
Race Director
I agree though... they're best used as paper weights or self-defense implements, if you're strong enough to wield them.
#8
Le Mans Master
a '75 with an L48? I'd throw the parts away or sell them numbers or no numbers
#9
Well, I have lots of time to decide. Right now I'm focused on getting it all back together! It's been nice weather all week and I wish I was driving instead of scrubbing, degreasing, painting, and banging my knuckles, in between working of course. Good thing I started with a budget or it might not have been back together for six months. While its apart I might as well...........and......and.....
Last edited by r75vet; 04-25-2013 at 01:03 AM.
#10
Instructor
If you've got the space, hang on to them. Even ordinary stuff over time can find a customer in need. I had a Rochester fuel injection system (cam, distributor all of it) that I'd bought to stick on a project car I was playing with back in the mid 1960's. Never got around to installing it and eventually sold the entire package for a few hundred bucks. Perhaps I was a bit early as perfect ones now fetch as much as $10,000 to $11,000. While L48 goodies will never replace a good investment portfolio or appreciate like those old fuel injection system have - one never knows .
RB
RB
#11
Drifting
The thing is, nobody is making old parts anymore. I'm keeping all my old stuff.
I have my old Camel Hump heads, my old TI system, even my old GM plastic tooth timing chain. Heck, I am even keeping my 'pink' forged LT-1 rods. I'm making a 'parts shrine' in my son's room and having it be a thing he can look at and ask questions. Not many kids get to touch this type of stuff.
I recently purchased a new set of sidepipe headers to replace the warped/rusted set that came on the car. This summer, I'm going to clean the old ones up enough to mount to his bed or something.
My wife will HATE it...it'll be awesome.
I have my old Camel Hump heads, my old TI system, even my old GM plastic tooth timing chain. Heck, I am even keeping my 'pink' forged LT-1 rods. I'm making a 'parts shrine' in my son's room and having it be a thing he can look at and ask questions. Not many kids get to touch this type of stuff.
I recently purchased a new set of sidepipe headers to replace the warped/rusted set that came on the car. This summer, I'm going to clean the old ones up enough to mount to his bed or something.
My wife will HATE it...it'll be awesome.