1990 vette harness
06-06-2006, 02:46 PM
#1
Navigator
Thread Starter
Member Since: May 2006
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
1990 vette harness
hey guys i pulled out my old bose system from my 1990 and i was wondering what harness i need to plug in my aftermarket pionner into.
The bose hookups in the car seem to have 2 separate prongs. The 88and up GM wiring harness doesn't seem like it fits. Where can i buy the wiring harness? any links? thanks. it wasn't too clear in the faq.
The bose hookups in the car seem to have 2 separate prongs. The 88and up GM wiring harness doesn't seem like it fits. Where can i buy the wiring harness? any links? thanks. it wasn't too clear in the faq.
Last edited by ajorda14; 06-06-2006 at 02:49 PM.
06-27-2006, 02:18 PM
#2
Advanced
Member Since: Nov 2005
Location: Yonkers NY
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Aftermarket Installation
Assuming you want to use the existing Bose speakers and amp and just replacie the head unit, you need a special amp intergration adapter. It's available from www.crutchfield.com and other vendors.
If you're going with all new equipment, you're going to need to bypass the stock Bose amp, which I think is located in the passenger side das. The harness you need is actually plugged into the stock amp.
Read the C4 Stereo Sticky for all the details.
If you're going with all new equipment, you're going to need to bypass the stock Bose amp, which I think is located in the passenger side das. The harness you need is actually plugged into the stock amp.
Read the C4 Stereo Sticky for all the details.
Last edited by richiep; 06-27-2006 at 03:27 PM.