[FS] Alpine MRD-M605 Mono Amp
03-31-2008, 04:34 AM
#1
Burning Brakes
Thread Starter
Member Since: Apr 2006
Location: Wylie Texas
Posts: 847
Likes: 0
Received 0 Likes
on
0 Posts
[FS] Alpine MRD-M605 Mono Amp
I'm selling my Alpine MRD-M605 Mono Amp that I'm not using anymore. Amp is in great condition! Comes with original box and paperwork.
Asking $150 or best offer plus shipping. I only accept Paypal and I will only ship to paypal confirmed addresses.
600 Watts of Power
Advanced Class-D 1-Channel Mono Amplifier
Link Ready Amplifier
MOSFET Power Supply
DC-DC PWM Power Supply
STAR Circuitry
Pre-Amp Discrete Stage
Digital Information Center
Bass Engine Function
Thermal Management Processor
Compatible with Amplifier Link Unit
Bass Engine:
Crossover Type: Digital 24dB/Octave Low Pass
Selectable Low Pass Crossover Frequency: 30Hz - 200Hz
Subsonic Filter Range : 15Hz - 50Hz or OFF
Subwoofer Level Adjustment Range: -15dB to 0dB
Subwoofer Phase Control : 0° Normal/180° Reverse
General-Amplifiers:
Input Impedance: 100k Ohm
Frequency Response : 20Hz-200Hz (±1dB)
Heat Sink (W x H x D): 7-31/64" x 2-5/16" x 8-11/16"
Input Sensitivity: 0.1V to 8.0V
Signal to Noise: 90dBA
Mono Speaker Impedance: 4 or 2 ohms
MAX Power at 14.4V, EIAJ:
Per channel into 2 ohms : 900W x 1
RMS Power at 12V, 20Hz-200Hz:
Per channel into 2 ohms : 400W x 1
Per channel into 4 ohms : 250W x 1
RMS Power at 14.4V, 20Hz-200Hz:
Per channel into 2 ohms : 600W x 1
--------------------------------------------------------------------------------
Asking $150 or best offer plus shipping. I only accept Paypal and I will only ship to paypal confirmed addresses.
600 Watts of Power
Advanced Class-D 1-Channel Mono Amplifier
Link Ready Amplifier
MOSFET Power Supply
DC-DC PWM Power Supply
STAR Circuitry
Pre-Amp Discrete Stage
Digital Information Center
Bass Engine Function
Thermal Management Processor
Compatible with Amplifier Link Unit
Bass Engine:
Crossover Type: Digital 24dB/Octave Low Pass
Selectable Low Pass Crossover Frequency: 30Hz - 200Hz
Subsonic Filter Range : 15Hz - 50Hz or OFF
Subwoofer Level Adjustment Range: -15dB to 0dB
Subwoofer Phase Control : 0° Normal/180° Reverse
General-Amplifiers:
Input Impedance: 100k Ohm
Frequency Response : 20Hz-200Hz (±1dB)
Heat Sink (W x H x D): 7-31/64" x 2-5/16" x 8-11/16"
Input Sensitivity: 0.1V to 8.0V
Signal to Noise: 90dBA
Mono Speaker Impedance: 4 or 2 ohms
MAX Power at 14.4V, EIAJ:
Per channel into 2 ohms : 900W x 1
RMS Power at 12V, 20Hz-200Hz:
Per channel into 2 ohms : 400W x 1
Per channel into 4 ohms : 250W x 1
RMS Power at 14.4V, 20Hz-200Hz:
Per channel into 2 ohms : 600W x 1
--------------------------------------------------------------------------------
Last edited by thatdood; 03-31-2008 at 04:38 AM.
