Audio/Electronics Stereo System Installation Info, Amplifiers, Subwoofers, Radar Detectors, Police Scanners, and CB Radios for the Corvette
Sponsored by:
Sponsored by: DashLynx

Double din in dash

Thread Tools
 
Search this Thread
 
Old 01-29-2015, 08:10 PM
  #1  
AndyK
Intermediate
Thread Starter
 
AndyK's Avatar
 
Member Since: Jan 2015
Location: Los Angeles
Posts: 26
Likes: 0
Received 2 Likes on 1 Post
Default Double din in dash

Hey Guys, new to the C6 world and bought a Pioneer NEX. When it comes to the installation kit/trim is there a preference over scosche or metra? Also What is the correct wiring harness for a 1lt without onstar or bose? The only other item I need to buy is the antenna connector correct? Thanks for the help!
Old 01-31-2015, 02:44 AM
  #2  
striper
Le Mans Master
 
striper's Avatar
 
Member Since: May 2005
Location: Fort Lauderdale, Florida
Posts: 6,366
Received 246 Likes on 215 Posts

Default

Since no one else has replied, the best advice is to go DoubleDMods, a vendor here on the forum. He will supply you with everything you will need to do the easiest and best conversion, all at the best prices too.
Old 01-31-2015, 03:44 AM
  #3  
markcz
Tech Contributor
 
markcz's Avatar
 
Member Since: May 2003
Location: North Augusta, SC
Posts: 7,032
Received 132 Likes on 114 Posts

Default

Originally Posted by AndyK
When it comes to the installation kit/trim is there a preference over scosche or metra?
I would go with the Metra, the newer model matches the oem dash better.

Originally Posted by AndyK
What is the correct wiring harness for a 1lt without onstar or bose?
Several choices, but BEST option for you IMO is the C2R-GM24

Originally Posted by AndyK
The only other item I need to buy is the antenna connector correct?
Correct. However, since you'll be doing all the other work, adding a backup camera would just take a few more minutes
Old 01-31-2015, 03:47 AM
  #4  
markcz
Tech Contributor
 
markcz's Avatar
 
Member Since: May 2003
Location: North Augusta, SC
Posts: 7,032
Received 132 Likes on 114 Posts

Default

Everything in one box HERE
Old 01-31-2015, 02:39 PM
  #5  
0Double D Mods
Former Vendor
Support Corvetteforum!
 
Double D Mods's Avatar
 
Member Since: Sep 2005
Location: Hazel Green, Wi www.doubledmods.com
Posts: 18,293
Received 132 Likes on 101 Posts
St. Jude Donor '12-'13

Default

Originally Posted by markcz
I would go with the Metra, the newer model matches the oem dash better.


Several choices, but BEST option for you IMO is the C2R-GM24


Correct. However, since you'll be doing all the other work, adding a backup camera would just take a few more minutes
The RP3GM11 replaces the cr2gm24 now
I have them just dont have website changed LOL
the rp3gm11 has the reverse connection the c2rgm24 does not have
Old 01-31-2015, 04:09 PM
  #6  
markcz
Tech Contributor
 
markcz's Avatar
 
Member Since: May 2003
Location: North Augusta, SC
Posts: 7,032
Received 132 Likes on 114 Posts

Default

I just got used to the C2R-GM24 replacing the GMCO

Get notified of new replies

To Double din in dash




Quick Reply: Double din in dash



All times are GMT -4. The time now is 10:12 PM.