DNX 890 Firmware Update
#1
Drifting
Thread Starter
DNX 890 Firmware Update
Wanted to let all Kenwood folks know - last couple of days by head unit sh_t the bed and the NAV would not work - this is the third time.
I looked tonight and Kenwood has released a new software/firmware update dated 4/30/15 - I'll be installing it in the morning.
I hope this is the fix ash I'm getting sick of my NAV going out. This is the 3rd time - last time I had to send the unit back to Kenwood in VA - tear dash apart, etc.
I'll let you guys know how it works.
I looked tonight and Kenwood has released a new software/firmware update dated 4/30/15 - I'll be installing it in the morning.
I hope this is the fix ash I'm getting sick of my NAV going out. This is the 3rd time - last time I had to send the unit back to Kenwood in VA - tear dash apart, etc.
I'll let you guys know how it works.
#3
Drifting
Thread Starter
Kenwood website - I've had to update twice now.
http://www.kenwood.com/cs/ce/mm/firm...2013a/eng.html
#4
Drifting
Thread Starter
Installed the new firmware version 1.10.0 on my DNX890HD this morning. Nothing to it. NAV is back to working normally. Sure wish Kenwood had a better way of notifying its customers other than waiting for the head unit to s__t the bed.
#5
Drifting
Thread Starter
So much for a good thing - same loss of memory problems occurring for the third time. Kenwood not willing to do anything other than have the head unit shipped back to them for repair - maybe I should send them the bill for pulling the unit out of the dash.