LED low bulb not allowing headlight motors to go back down?
#1
Drifting
Thread Starter
Member Since: Nov 2006
Location: Ventura, California
Posts: 1,992
Likes: 0
Received 42 Likes
on
29 Posts
LED low bulb not allowing headlight motors to go back down?
I installed some LED 9006 bulbs and the lights work fine, but once the headlight doors pop up, they will not go back down when the lights are turned off. I assume I need a resistor of some sort, does anyone have any ideas?
#3
Supporting Vendor
While a resistor would work, it will also present a substantial fire hazard given how hot it would get. Load resistors for LED turn signals only have to dissipate ~25w of power. A headlight resistors that could compensate for LED bulbs would have to Dissipate over double that wattage.
A much simpler solution is to simply turn on your high beams, then turn off your headlights. As long as you have halogen high beam bulbs this will work.
A much simpler solution is to simply turn on your high beams, then turn off your headlights. As long as you have halogen high beam bulbs this will work.
#4
Night Owl for life
Member Since: Nov 2003
Location: Bugs Bunny should'a made a left turn here
Posts: 23,194
Received 3,241 Likes
on
1,664 Posts
those things cant be very bright...got any pics?