Dakota Digital CRC 1000 LS Cruise Controller Issue
03-12-2017, 05:31 PM
#1
Racer
Thread Starter
Dakota Digital CRC 1000 LS Cruise Controller Issue
Hey all,
wasnt really sure sure where to put this so thought I'd start here.
I have a 96 Vette that I put a LS376/495 GM crate engine in last year. I've finally gotten around to installing my Dakota Digital CRC-1000 LS Cruise Controller this weekend, but I cannot seem to make it work.
I'm using the wires going to the factory C4 Cruise Module to signal Cruise On, Set/Coast, and Resume/Accel. Pins A, L, and M respectively.
Everything else is wired and verified per instructions but it won't take a set. The green LED on the Dakota Digital module lights up after ignition on/engine start, but once up to speed and I depress the Set button, the LED blinks orange and nothing happens.
Anybody have any thoughts??
Thanks,
Will
wasnt really sure sure where to put this so thought I'd start here.
I have a 96 Vette that I put a LS376/495 GM crate engine in last year. I've finally gotten around to installing my Dakota Digital CRC-1000 LS Cruise Controller this weekend, but I cannot seem to make it work.
I'm using the wires going to the factory C4 Cruise Module to signal Cruise On, Set/Coast, and Resume/Accel. Pins A, L, and M respectively.
Everything else is wired and verified per instructions but it won't take a set. The green LED on the Dakota Digital module lights up after ignition on/engine start, but once up to speed and I depress the Set button, the LED blinks orange and nothing happens.
Anybody have any thoughts??
Thanks,
Will
