Help needed to wire Kenwood 9903s and PAC OS2x
#1
Help needed to wire Kenwood 9903s and PAC OS2x
Hi got my 9903 and PAC OS-2x. It is not wired and there is not much info included. Not sure what to do. If anyone has done this please let me know. I can't figure out how to connect the 9903 to the pac
#2
Le Mans Master
Member Since: Jan 2017
Location: Morris County New Jersey
Posts: 5,372
Received 1,636 Likes
on
1,121 Posts
A little more info could be helpful. Like what year is your car, is your system stock other than the new head unit, also if it is stock do you have the Bose system. Do you have any steering wheel controls that you would like to retain. I recently installed a Pioneer in my C6 using the Pac RP5-GM11 harness, which is the harness most recommended for the C6 corvette. But to answer your question in basic terms, for the most part you just have to color match the wires from the Kenwood wire harness to the Pac wiring harness. Also use crimp style connectors or solder them, don't use the twisty style connectors you would use on your home electrical.
The following users liked this post:
Vtckf (03-17-2017)
#3
I think I might be on the right track now. At first it made no sense. It's an 07 bose nav but it's getting a Kenwood 9903. The PAC website had some info that was helpful. There were no instructions for the PAC in the box.
The following users liked this post:
Vtckf (03-17-2017)
#5
Former Vendor
the os2x harness replaced that one 3 years ago...
you just color match wires
you just color match wires
Last edited by Double D Mods; 03-19-2017 at 06:48 PM.