0Sales@MVPAutoParts.com

Just curious if anyone here is interested in these TOP OF THE LINE Q Series Component set from MB Quart. :)

The regular retail price is over $800/set. :eek::eek::eek:
And my price is $349.99 :)



Specifications:
Impedance: 4 Ohms
Frequency Response: 48-32k
Sensitivity: 86 dB
Power Range: 90-170 watts
Crossover Freq: 2600Hz Hz
Crossover Slope: 18 dB/octave

Components:
QTC 25 Tweeter 1" (25mm) Q Series Neo Tweeter
QWC 160 Midrange 6.5" (160mm) Q Series Midrange Driver
MXQ 218 (GmbH) Xover German Crossover for QM218.61Q
MOUNT: 25NX ANGLE Rings Angle Mounting Ring for 25NX Tweeters
MOUNT: 25NX FLUSH Rings Flush Mounting Ring for 25NX Tweeters
MOUNT: 25NX SURFACE Rings Surface Mounting Ring for 25NX Tweeters
QM 160.78 AUFBAU Mounting Kit Raised mounting ring (.47") for 160.03KX
QM 160.79 MS EINBAU Mounting Kit Flush Rings & Grilles for 160TX-3

Metal Wulf

:cool: :thumbs:

YELLOHHH

Tuan, on a side note, what is the highest MB Quart line available in a 3 way system?

Greg
:steering:

0Sales@MVPAutoParts.com

Greg,

I'm very sure that MB Quart does not make 3-way system in Q Series. However, they do make the a 6.5" 3-way system in Premium Series (PSD 316). Below is the pic. :cheers:

kittmaster

Alpine just came out with a 3 way set that has wood pulp embedded in to the surround, We've built the demo cabinets for them and they are absolutely unbelievable. Inquire alpine they'll be able to tell you.

Kale

What is that supposed to accomplish? I've heard a lot of neat materials, everything from Kevlar to Carbon Fibre/ Fiberglass cones, and so far, I think the best sounding is... good old paper and butyl.

corvette-pilot

Great,
First it was watching out for rust, be careful for the leather seats, keep the carpet clean, don't break the top.

NOW we have to watch for termites :crazy:

DC5

For what it's worth, I'm running a pair of the MB Quart QM218.61Q (what Tuan is advertising) driven by a JL Audio 300.2. I am extremely pleased with the SQ of this series. BTW, I did not purchase this set from Tuan, however his sale price is rock bottom. I actually paid the same price through a different distributor, which had the absolutely the lowest price I could find at the time (internet sales). Nice price Tuan. If I had been aware of Tuan, I wouldn't have hesitated purchasing from him at this price! :thumbs:

0Sales@MVPAutoParts.com

:lol: :lol: :lol:

brianw21

Alpine released their F#1 Status speaker line at CES. The SPX-Z18T is the three way, and the SPX-Z15M is the two way. Like all F#1 status equipment, it will only be avail through certain dealers, and unobtainable on the internet.

Something else to note is that Phoenix Gold release a phnominal set at CES called the Ti Elite. These are made by morel for PG, and... well :cool:





[Modified by brianw21, 5:39 PM 2/26/2003]

mrkln

I drool every time I see those speakers. :yesnod:

bogus

I have an antique set of Canton Pullman series RS3's... 6" midbass, 4" mids and 1" silk dome tweets. These speakers are about 6 years old.

And they have paper cones. :D

I agree with Kale - Paper cones are the BEST. I have a new set of Boston Pro Series and they have a polymer cone. They sound great, but slightly artifical.

The low price speakers that I have been recommending are the Polk Audio GRX series - mainly because they have a coated paper cone. Much warmer then other cheap price plastic coned speakers.