PCV Oil Catch Cans - Two Chamber
#1
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2004
Location: Manassas Park VA
Posts: 36,679
Received 421 Likes
on
322 Posts
St. Jude Donor '07-'08,-'13-'14, '16-'17
PCV Oil Catch Cans - Two Chamber
PCV Oil Catch Cans
$129.99
They come in 4 colors. Red, Silver, Black and Blue
[/CENTER]
Our Oil Catch Cans are made of T-6061 Billet Aluminum. All the fittings on this unit are brass. The catch can is a two chamber design and comes with a changeable filter element for easy cleaning.
LSx engines all suffer from oil vapor blow by into the intake manifold under hard driving conditions. The two chamber design helps trap the oil vapor, and separates it into the second chamber for safe keeping. The benefit is that you keep your manifold from getting all gummed up and robbing you of horsepower.
LSx engines all suffer from oil vapor blow by into the intake manifold under hard driving conditions. The two chamber design helps trap the oil vapor, and separates it into the second chamber for safe keeping. The benefit is that you keep your manifold from getting all gummed up and robbing you of horsepower.
PCV Oil Catch Can Link
Regards
Chip
Last edited by CCA Corvette Parts; 11-05-2016 at 12:22 PM.
#2
Pro
Member Since: Jan 2006
Location: Alexandria Northern Virginia
Posts: 643
Likes: 0
Received 1 Like
on
1 Post
I can vouch for Chip's quality on these. My track car and street car both run these. Great for motors that "drink" oil through the PCV system. Great guy to deal with too!
My suggestion on running these would also be to drill a filter into an oil cap and then block the stock valve cover to intake vent tube. Easy fix and you don't have an oily mess in your intake when you take it off next time!
Cassidy
My suggestion on running these would also be to drill a filter into an oil cap and then block the stock valve cover to intake vent tube. Easy fix and you don't have an oily mess in your intake when you take it off next time!
Cassidy
#3
Safety Car
Hey Chip... does it matter how they're installed i.e. which port is the inlet vs. outlet? I installed mine like your website shows and how I've always done it where the top port is the inlet and the bottom port is the outlet. Does it actually matter, or does it work better one way or the other?
#4
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2004
Location: Manassas Park VA
Posts: 36,679
Received 421 Likes
on
322 Posts
St. Jude Donor '07-'08,-'13-'14, '16-'17
Hey Chip... does it matter how they're installed i.e. which port is the inlet vs. outlet? I installed mine like your website shows and how I've always done it where the top port is the inlet and the bottom port is the outlet. Does it actually matter, or does it work better one way or the other?
Top port is the inlet
Side port is the outlet.
Connect from the PCV to the top of the can
Connect from the side of the can back to the manifold.
Peace
Chip
#5
Just placed my order! I immediately told 3 co-workers about my purchase. Explained why it's a good buy. And 2/3 ordered one as well. Stil working on that third one lol. Can't wait to get installed!'
#7
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2004
Location: Manassas Park VA
Posts: 36,679
Received 421 Likes
on
322 Posts
St. Jude Donor '07-'08,-'13-'14, '16-'17
All Black Back Orders will ship tomorrow.
We have lifted the back order status from the website
Sorry for the delay
Peace
Chip
We have lifted the back order status from the website
Sorry for the delay
Peace
Chip
#8
Drifting
i use 2 of these and they work great. thanks.
#13
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2004
Location: Manassas Park VA
Posts: 36,679
Received 421 Likes
on
322 Posts
St. Jude Donor '07-'08,-'13-'14, '16-'17
If you look into other products, you will see we are
The best quality and the best price
Peace
Chip