KeaRveK

Selling a bunch of race parts along with the Racecar (https://www.corvetteforum.com/forums...on-2014-a.html)

See the attached PDF file for a more detailed description and pictures. Prices OBO and don't include shipping. PM or e-mail. Thread will be checked periodically but no priority to posters..

SOLD Set of 4 CCW C14 Wheels

$1,800.00 Set of 4 18" TSW Nurburing Wheels with Hoosier H20 Wets

$700.00 Set of 4 315 Hoosier R6's - 3 Heat Cycles

SOLD 3 Hoosier 315 R6 New

$300/ea 1 Hoosier 315 A6 New

$95/ea 4 315/30R18 R6 Takeoffs - 2 SOLD, 2 Left

SOLD 4 295/30R18 R6 Takeoffs

SOLD 3 315/30R18 A6 Takeoffs


$250.00 1 Sets of Cobalt CRB.XR2.D731

$375/ea 2 Sets of Cobalt CRB.XR1.AP5-20MM

$650.00 Set of PFC Direct Drive 2 piece rotor NEW

$180.00 Set of PFC Direct Drive 2 piece rotor USED

$375.00 Set of PFC Direct Drive Rings

$250.00 Set of Rings for Front AP CP5555 Performance AFX Setup

SOLD Rotor Blank 55043 NEW Centric CTEK

SOLD Rotor Blank 55044 NEW Centric CTEK

$200.00 Set of Front Rotors for Performance AFX AP CP5555 Setup Used

Make Offer Set of PFC Direct Rings USED

Make Offer Set of Front Rotors Rings For AP USED

SOLD 3 Front c5z06 rotor blanks USED

Free 1 Rear c5z06 rotor blank USED

$50/set 2 Sets of Cobalt CRB.XR1.AP5 USED

$25.00 1 Set of Raybestos ST-47 Front C5zo6

$15.00 PFC Front c5Zo6 pads Used


$10/ea 4 Quarts 75W90 Royal Purple Diff Oil

$5 1 Container ACDelco Limited Slip Additive

SOLD 2 Bottles Redline Water Wetter

$13/ea 1 Bottles of Motul RBF600

SOLD 1.25 Bottles of Shafer Coolshirt Additive

$13 1 Bottle of Wildwood 600 Plus

SOLD 4 Bottle of Joe Gibbs Synthetic 75W90 Gear Oil

SOLD 3 Bottle of Joe Gibbs Synthetic STF Syncromesh Trans Fluid


$375.00 Race Ramps with Trailer Adapters (Not selling until after car sells)

SOLD Pfadt Camber Kit

$35.00 SPAL 5.6" Fan

$20.00 2 Stock Front Hubs

FuriousDonuts

I'll take the following:

- Water wetter
- Coolshirt additive
- Joe Gibbs gear oil
- Joe Gibbs trans fluid
- 5 bottls of RBF600 (if you're willing to split)

Are you going to the awards banquet? If so I can pay and pick up then.

Also, you should be able to take your used rotors to a metal reclamation site and get a couple bucks for them...

GLWS

Wah

What condition are the stock front hubs?

yakisoba

I'll take the camber kit off your hands. PM coming with ship to. Paypal ok?

KeaRveK

Got it. Will bring to banquet

KeaRveK

Used from 01 Z06 as stated in PDF.

KeaRveK

Replied via PM yesterday

KeaRveK

Some better pics of the CCW's. Near perfect. One wheel has a small blemish on one of the spokes.

jcp907

Please PM when the Race Ramps are available.

Hi Volts Z06

What sizes are the CCW wheels?

KeaRveK

Sure....or black friday special... buy the racecar and I'll throw in the ramps FREE.

KeaRveK

As copied from pdf file:

Wheels have probably 10 track days on them.**True and no curb rash.*Perfect wheels for racing or still soon enough to keep them for street/show use.**Fronts are 18x10 with 7.5" backspacing, Rears are 18x11 with 8.25" backspacing.**Backspacing measured from surface of
hub to rim edge.**Currently have Hoosier 315/30R18 R6's with 3 heat cycles mounted.

FuriousDonuts

Received items in great condition. Free bump for a good seller.

jvtex

Can you give the specs on the TSW Nurburing Wheels?
Are they the same as the CCW's?

KeaRveK

Sure, below is what I have written in my race book. Wheels are standard 18x10.5 from TSW though.


Backspacing - 8.5"

Ran 315 Hoosiers on these with no problems. I would not go with any wider of a tire though.

FRC Z51

Interested in any of the AP pads or rotors for the 6-piston kit.

Also, are these for the 14" kit? >>

$200.00 Set of Front Rotors for Performance AFX AP CP5555 Setup Used

KeaRveK

Yes, the rotors are 14" in diameter. Check your PM...

KeaRveK

CCW's sold. Tires still available.

KeaRveK

Wheels back for sale. See new thread,

https://www.corvetteforum.com/forums...post1588833377