FS: Black CCW C5 17" Race setup w/ Hoosiers A3S05s
08-18-2006, 06:18 PM
#1
Safety Car
Thread Starter
Member Since: Jun 2000
Location: Winter Garden (central),FL,USA
Posts: 4,662
Received 77 Likes
on
53 Posts
FS: Black CCW C5 17" Race setup w/ Hoosiers A3S05s
******Sold to Bob(Idavette98)!******
Hey guys, I thought I'd give you guys 1st crack @ the setup before I add them to the my 'going out of the C5 business sale' in the other section
It's a 17x11" & 17x12" CCW race setup in anodized black. They're new as of this Feb--maybe 10 events total on them. Perfect shape & no curbing etc, as they've only been used for Solo. The inside of the rear wheels came in contact w/ the spring slightly--no harm done (whoever runs this setup will need to grind the front part of their rear spring caps).
They include, BRAND NEW, STICKER Hoosier A3S05s in 315/335s.
Why am I selling? I was fortunate enough to acquire a C6Z, so..... These won't fit!
I'm having problems w/ pics on CarDomain.com for some reason (after all these years, but the wheels are the ones in my sig pic.).
I also have the small CCW spacers I will include as well.
Ready to roll... $2300
pls e-mail me @ gtbzr1@yahoo.com w/ questions...
Thx
Hey guys, I thought I'd give you guys 1st crack @ the setup before I add them to the my 'going out of the C5 business sale' in the other section
It's a 17x11" & 17x12" CCW race setup in anodized black. They're new as of this Feb--maybe 10 events total on them. Perfect shape & no curbing etc, as they've only been used for Solo. The inside of the rear wheels came in contact w/ the spring slightly--no harm done (whoever runs this setup will need to grind the front part of their rear spring caps).
They include, BRAND NEW, STICKER Hoosier A3S05s in 315/335s.
Why am I selling? I was fortunate enough to acquire a C6Z, so..... These won't fit!
I'm having problems w/ pics on CarDomain.com for some reason (after all these years, but the wheels are the ones in my sig pic.).
I also have the small CCW spacers I will include as well.
Ready to roll... $2300
pls e-mail me @ gtbzr1@yahoo.com w/ questions...
Thx
Last edited by GTB/ZR-1; 08-21-2006 at 08:50 PM.
08-18-2006, 06:43 PM
#2
Pro
Member Since: Jan 2004
Location: Plantation FL
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
Georgie Porgy pudding and pie.............
I have no use for the Hoosiers and 05's at that, as I run Kumho's, but I am interested in your wheels for my ASP beast.
I also have a set of net CCW Coarsair's you know John's CCW's for the C6Z06 18x11. I used them in the rear, but I believe they would go in the front of your car. You might have to ask John about the offset.
I am interested in trading you kemosabe
email me your phone # Dr. Bonefede
I have no use for the Hoosiers and 05's at that, as I run Kumho's, but I am interested in your wheels for my ASP beast.
I also have a set of net CCW Coarsair's you know John's CCW's for the C6Z06 18x11. I used them in the rear, but I believe they would go in the front of your car. You might have to ask John about the offset.
I am interested in trading you kemosabe
email me your phone # Dr. Bonefede
08-20-2006, 02:00 PM
#5
Safety Car
Thread Starter
Member Since: Jun 2000
Location: Winter Garden (central),FL,USA
Posts: 4,662
Received 77 Likes
on
53 Posts
For those that requested pics.
The front wheels came in slight contact w/ the A-arms w/o the spacers (which I soon put on after the rub), and the rear w/ the metal end cap of the rear spring.
My car was ridiculously low in the rear, so only a slight grind on the spring cap will be needed to clear.
The contact will not affect the integrity of the wheel--consider them pre-cleared for your application
Fronts:
Rears:
As stated, they're in nearly-new condition w/ no flaws on the outside portion of the wheels
The front wheels came in slight contact w/ the A-arms w/o the spacers (which I soon put on after the rub
), and the rear w/ the metal end cap of the rear spring.My car was ridiculously low in the rear, so only a slight grind on the spring cap will be needed to clear.
The contact will not affect the integrity of the wheel--consider them pre-cleared for your application
Fronts:
Rears:
As stated, they're in nearly-new condition w/ no flaws on the outside portion of the wheels
08-22-2006, 11:38 PM
#9
Racer
Member Since: Aug 2005
Location: Boise ID
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Thanks George!!
Originally Posted by GTB/ZR-1
Sold to Bob(Idavette98)!
Thanks for the fast shipping and smooth transaction.
I will have these before this weekend's Solo event.
Grinder is ready!!!
-Bob
