Autocrossing & Roadracing Suspension Setup for Track Corvettes, Camber/Caster Adjustments, R-Compound Tires, Race Slicks, Tips on Driving Technique, Events, Results
Sponsored by:
Sponsored by:

autox tire pressures

Thread Tools
 
Search this Thread
 
Old 08-20-2006, 10:11 AM
  #1  
Rich427
Pro

Thread Starter
 
Rich427's Avatar
 
Member Since: Mar 2006
Location: Ft Myers FL
Posts: 662
Received 63 Likes on 29 Posts

Default autox tire pressures

I have a '01 6 speed vert that I occassionally run (2 - 4 times a year) an NCCC autox. The car is basically stock and I run in the 1SH class. I just recently got rid of the run flats and changed to Goodyear GS D3s for everyday tires. Can someone recommend tire pressures front/rear for this tire. Our club is doing a Corvette/Porsche challenge in a couple of weeks on an asphalt parking lot. The Porsche guys have gotten the lot and will be setting up the track, so I expect it will be tight with not a lot of areas to exercise the horsepower.

Any help for the tire setup would be appreciated.

Thanks in advance!

Rich
Old 08-20-2006, 12:10 PM
  #2  
TedDBere
Melting Slicks
 
TedDBere's Avatar
 
Member Since: Jun 2002
Location: Charleston South Carolina
Posts: 3,070
Likes: 0
Received 4 Likes on 4 Posts

Default

When I run GSD3s I run 40 lbs front and 36 lbs rear. Good luck.

Old 08-20-2006, 10:23 PM
  #3  
Rich427
Pro

Thread Starter
 
Rich427's Avatar
 
Member Since: Mar 2006
Location: Ft Myers FL
Posts: 662
Received 63 Likes on 29 Posts

Default

Thanks Mr. DBere!

That at least gives me a starting point and I can adjust off of those pressures after each run.

Get notified of new replies

To autox tire pressures




Quick Reply: autox tire pressures



All times are GMT -4. The time now is 10:47 PM.