Thanks Randy (DRM)
#2
Instructor
Member Since: Dec 2001
Location: Memphis TN
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
If you don't mind me piggy backing on your post.....
I owe a Thanks to both Doug and Randy.
At the WC Road America race, both Randy and Doug went waaaaay out of there way to help me figure out a HUGE braking issue. Doug spent mucho time on the phone as Randy did the leg work back in MN.
Thanks guys!!!! I started to get something going....until that damn valve decided to see what the rest of the engine looked like.
I owe a Thanks to both Doug and Randy.
At the WC Road America race, both Randy and Doug went waaaaay out of there way to help me figure out a HUGE braking issue. Doug spent mucho time on the phone as Randy did the leg work back in MN.
Thanks guys!!!! I started to get something going....until that damn valve decided to see what the rest of the engine looked like.
Last edited by A.D.Malmquist; 09-01-2006 at 08:21 PM.
#3
Instructor
Member Since: Jan 2004
Location: Neshkoro Wis
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
I'll second the above comments. I recently had the pleasure of working with Randy and Doug on an engine rebuild and while I haven't been on the track yet the engine dyno'd strong and they were great to work with!! DRM ROCKS!!
#4
Pro
Member Since: Jan 2006
Location: Long Island N.Y.
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
Great guy... thanks for your help today, Randy. I look forward to the stainless pistons and hopefully the seals will do the trick.
And best of luck on the wedding!!!!
Be good,
ace
(Tom)
And best of luck on the wedding!!!!
Be good,
ace
(Tom)