Build your own reverse flow cooled heads?
09-03-2006, 11:07 PM
#1
Team Owner
Thread Starter
Member Since: Mar 2001
Location: Boston, Dallas, Detroit, SoCal, back to Boston MA
Posts: 30,606
Received 239 Likes
on
167 Posts
Build your own reverse flow cooled heads?
How's this for reverse flow cooled heads?
http://www.popularhotrodding.com/tec..._parts_engine/
http://www.popularhotrodding.com/tec..._parts_engine/
Through an ingenious distribution system, water is plumbed to the heads beneath the exhaust ports, and returned via the core plug holes in the block.
Appearances can be deceiving, as a look inside the manifold reveals. The plenum intake was epoxy-filled over a plaster mold to effectively produce a single-plane manifold within its confines.
