'07 C6 Z51 Scale/Alignment results
#1
Advanced
Thread Starter
Member Since: Feb 2000
Location: Bakersfield CA
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
'07 C6 Z51 Scale/Alignment results
In preparation for upcoming HPDE's and to correct the factory alignment, I had a local race chassis shop scale and align my 2007 C6 Z51.
The results were:
LF RF
--- ---
907 840
LR RR
--- ---
888 835
Cross Weight ended up at 50.1/49.9% from a starting point of 46.8/53.2%.
The final alignment settings were -1.3/-0.9 Camber F/R, 7 Caster, and +1/8"/-1/16" Toe F/R.
Mike
The results were:
LF RF
--- ---
907 840
LR RR
--- ---
888 835
Cross Weight ended up at 50.1/49.9% from a starting point of 46.8/53.2%.
The final alignment settings were -1.3/-0.9 Camber F/R, 7 Caster, and +1/8"/-1/16" Toe F/R.
Mike
Last edited by M_Minnick; 10-02-2006 at 09:36 PM.
#2
Tech Contributor
Originally Posted by M_Minnick
The final alignment settings were -1.3/0.9 Camber F/R, 7 Caster, and +1/8"/-1/16" Toe F/R.
Mike
Mike
Have fun
#6
Safety Car
Member Since: Jun 2005
Location: DFW This user does not support or recommend the product or service displayed in the ad to the right
Posts: 3,989
Likes: 0
Received 3 Likes
on
3 Posts
Originally Posted by gkmccready
400lbs difference between the two. I hope some of that is driver and fuel. :-)
#7
Advanced
Thread Starter
Member Since: Feb 2000
Location: Bakersfield CA
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by C6400hp
Surely a C6 Z51 can't weigh 3470 without a driver and/or nearly full tank of fuel.
Mike