C-4 Autocross ar
11-01-2006, 06:53 PM
#1
Burning Brakes
Thread Starter
Member Since: Sep 2001
Location: Anderson South Carolina
Posts: 981
Likes: 0
Received 0 Likes
on
0 Posts
C-4 Autocross ar
This is a very clean 1989 red coupe with the following equipment:
Runs NCCC Group IIE
6-Speed Transmission, buyers choice of 2 out of 3 spare 6-speeds
B&M SHort Shifter
TPIS Roll Bar
3:54 rear end
Poly bushings
Stage III Spec clutch
All 4 hubs replaed in 2004
All u-joints replaced in 2004
Current 5-point seat belts
With the right driver this car is very fast
Illness forces sale
If interested call (864) 376-0880 or e-mail (vettmike@mindspring.com)for additional details
PRICE $15,000 FIRM
Also, Timberwolf 22.5 foot enclosed trailer, this trailer is designned for a C-4 Corvette, has Left Side door positioned such that the drivers door will open with the car in the trailer.
Has tire rack
Has Generator door
All new tires
Needs new fenders
Trailer price $6,000 or $20,000 for both car and trailer
Runs NCCC Group IIE
6-Speed Transmission, buyers choice of 2 out of 3 spare 6-speeds
B&M SHort Shifter
TPIS Roll Bar
3:54 rear end
Poly bushings
Stage III Spec clutch
All 4 hubs replaed in 2004
All u-joints replaced in 2004
Current 5-point seat belts
With the right driver this car is very fast
Illness forces sale
If interested call (864) 376-0880 or e-mail (vettmike@mindspring.com)for additional details
PRICE $15,000 FIRM
Also, Timberwolf 22.5 foot enclosed trailer, this trailer is designned for a C-4 Corvette, has Left Side door positioned such that the drivers door will open with the car in the trailer.
Has tire rack
Has Generator door
All new tires
Needs new fenders
Trailer price $6,000 or $20,000 for both car and trailer
11-02-2006, 10:36 AM
#4
Burning Brakes
Thread Starter
Member Since: Sep 2001
Location: Anderson South Carolina
Posts: 981
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BrianCunningham
bump for ya
an 89 6spd is a good thing to have to autocrossing
an 89 6spd is a good thing to have to autocrossing
Brian, Are you still in Palmdale?
The Corvette club out there Antelope Valley Corvette Club is a great group of folks, get in touch with them.
Mike
11-02-2006, 10:37 AM
#5
Burning Brakes
Thread Starter
Member Since: Sep 2001
Location: Anderson South Carolina
Posts: 981
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fastzr1
And Mike's car runs in the front. Very good car if your looking for an already built C4 race car.
Did you sell your car?
Did Tex get in touch with you?
Mike
11-02-2006, 05:17 PM
#6
Team Owner
Member Since: Mar 2001
Location: Boston, Dallas, Detroit, SoCal, back to Boston MA
Posts: 30,606
Received 239 Likes
on
167 Posts
Originally Posted by vettmike
Brian, Are you still in Palmdale?
The Corvette club out there Antelope Valley Corvette Club is a great group of folks, get in touch with them.
Mike
The Corvette club out there Antelope Valley Corvette Club is a great group of folks, get in touch with them.
Mike
11-02-2006, 08:32 PM
#7
Le Mans Master
Originally Posted by vettmike
Thanks Ed,
Did you sell your car?
Did Tex get in touch with you?
Mike
Did you sell your car?
Did Tex get in touch with you?
Mike
I have talked to Tex a lot.
I'm leaving again in Jan for another 7 months. Not by choice, but by direction.
I hope your feeling better.
Ed
11-03-2006, 09:13 AM
#8
Burning Brakes
Thread Starter
Member Since: Sep 2001
Location: Anderson South Carolina
Posts: 981
Likes: 0
Received 0 Likes
on
0 Posts
Be careful over there.
I am feeling better every day, thanks.
We have sold the 66 and the 84, now the 89 and the trailer.
We are oing todrive to Huntsville over the weekend and watch the fun. Then we are goin to Roebling Road to help out.
Mike
I am feeling better every day, thanks.
We have sold the 66 and the 84, now the 89 and the trailer.
We are oing todrive to Huntsville over the weekend and watch the fun. Then we are goin to Roebling Road to help out.
Mike
11-13-2006, 08:10 PM
#12
Burning Brakes
Thread Starter
Member Since: Sep 2001
Location: Anderson South Carolina
Posts: 981
Likes: 0
Received 0 Likes
on
0 Posts
pictures of car and trailer posted at the followinh url:
http://www.slalom4me.com/html/vettmike.html
http://www.slalom4me.com/html/vettmike.html
11-21-2006, 12:31 PM
#15
Le Mans Master
Mike is working on getting additional photos of his car and
trailer together while he regains his strength and health.
As soon as these are available, they'll go up on the link.
In the meantime, post or get in touch with him to ask any
questions about his car or trailer.
Incidently, many here among the C4 crowd may know Mike
as a result of using his billet throttle pedal bracket to solve
the breakage problems encountered with the plastic OEM
unit. I believe that R-D Racing used to distribute Mike's
billet bracket.
.
trailer together while he regains his strength and health.
As soon as these are available, they'll go up on the link.
In the meantime, post or get in touch with him to ask any
questions about his car or trailer.
Incidently, many here among the C4 crowd may know Mike
as a result of using his billet throttle pedal bracket to solve
the breakage problems encountered with the plastic OEM
unit. I believe that R-D Racing used to distribute Mike's
billet bracket.
.
11-21-2006, 01:45 PM
#16
Burning Brakes
Thread Starter
Member Since: Sep 2001
Location: Anderson South Carolina
Posts: 981
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Ken,
We took more pictures on Sunday, The wife and I put the car on the lift. Then the battery in my Digital Camera died, I ordered several batteries on ebay, as soon as I receive the new batteries I will get them to you.
And yes, Ken is correct, I designed and had the billet gas pedal mount fabricated.
For those that don't know, I am recovering from Brain Cancer surgery, if all goes OK, I will get the OK to go back to work within the next several weeks. As a side note, if I go bak to work befofre the car sells, it will not be for sale.
We are going to Savannah GA. this coming weekend to watch and work as we can, then the following weekend to Huntsville AL. to watch the 14 event weekend.
Mike
We took more pictures on Sunday, The wife and I put the car on the lift. Then the battery in my Digital Camera died, I ordered several batteries on ebay, as soon as I receive the new batteries I will get them to you.
And yes, Ken is correct, I designed and had the billet gas pedal mount fabricated.
For those that don't know, I am recovering from Brain Cancer surgery, if all goes OK, I will get the OK to go back to work within the next several weeks. As a side note, if I go bak to work befofre the car sells, it will not be for sale.
We are going to Savannah GA. this coming weekend to watch and work as we can, then the following weekend to Huntsville AL. to watch the 14 event weekend.
Mike
11-21-2006, 08:08 PM
#17
Melting Slicks
Hi Mike,
I recently received your pedal mount-a work of art!
I did not know how ill you were-hope you get well soon!!!
Happy Thanksgiving,
Steven (from NY)
I recently received your pedal mount-a work of art!
I did not know how ill you were-hope you get well soon!!!
Happy Thanksgiving,
Steven (from NY)
Last edited by STEVEN13; 11-21-2006 at 08:31 PM.
11-22-2006, 01:42 PM
#18
Burning Brakes
Thread Starter
Member Since: Sep 2001
Location: Anderson South Carolina
Posts: 981
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by STEVEN13
Hi Mike,
I recently received your pedal mount-a work of art!
I did not know how ill you were-hope you get well soon!!!
Happy Thanksgiving,
Steven (from NY)
I recently received your pedal mount-a work of art!
I did not know how ill you were-hope you get well soon!!!
Happy Thanksgiving,
Steven (from NY)
I am getting better every day, I am luckly, I have a great job (Lockheed Martin) for 37 1/2 have years. I am also luckly as brian cancer doesn't hurt, if fact, if it wasn't for other factors a person would never know they have it.
Enjoy your new mount, this 4-day weekend would be a great time to install it.
mike