FS: CCW Wheels & Cambered Goodyear Race Tires
03-27-2007, 09:10 PM
#1
Racer
Thread Starter
Member Since: Dec 2003
Location: Ft Lauderdale Florida
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
FS: CCW Wheels & Cambered Goodyear Race Tires
Set #7: 4 CCW wheels & Cambered Goodyear Race tires
Two polished CCW 18” x 11” wheels with a 8.50" backspacing mounted with two NEW / just scuffed Goodyear “Cambered” 12.0” x 25.5” x 18” road race compound
AND
Two polished CCW 18”x 12” wheels with a 8.50" backspacing mounted with two NEW / just scuffed Goodyear “Cambered” 12.0” x 25.5” x 18” road race compound
Just 1 heat cycle on these tires.
All for $3,300.00 plus shipping. Will not seperate.
Racer BUZZ
Cell: 954-612-3606
E-Mail rcrbuzz@bellsouth.net
Two polished CCW 18” x 11” wheels with a 8.50" backspacing mounted with two NEW / just scuffed Goodyear “Cambered” 12.0” x 25.5” x 18” road race compound
AND
Two polished CCW 18”x 12” wheels with a 8.50" backspacing mounted with two NEW / just scuffed Goodyear “Cambered” 12.0” x 25.5” x 18” road race compound
Just 1 heat cycle on these tires.
All for $3,300.00 plus shipping. Will not seperate.
Racer BUZZ
Cell: 954-612-3606
E-Mail rcrbuzz@bellsouth.net
Last edited by Racer Buzz; 05-06-2007 at 01:59 PM.
05-06-2007, 01:57 PM
#4
Racer
Thread Starter
Member Since: Dec 2003
Location: Ft Lauderdale Florida
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
Wheel back spacing
I can't measure the wheel offset but I can tell you they have a 8.50" backspace dimension. As measured from the inside wheel lip to the hub facing of the wheel.
I ran them with a .850" thick front wheel spacer as suppied by CCW when I bought the wheels new to fit my larger StopTech brake calipers. So 8.50" less .850 now equals a 7.65" backspace with the wheel spacers.
I also ran a .250" wheel spacer on the rears to clear the larger StopTech calipers.
I ran them with a .850" thick front wheel spacer as suppied by CCW when I bought the wheels new to fit my larger StopTech brake calipers. So 8.50" less .850 now equals a 7.65" backspace with the wheel spacers.
I also ran a .250" wheel spacer on the rears to clear the larger StopTech calipers.
