Brake cooling??
#1
Pro
Thread Starter
Brake cooling??
Has anyone tried experimenting with the front cooling ducts. I Feel that not enough air is being pushed through from the bottom of the car to really cool off the brakes under heavy road racing?
Maybe some after market stuff? I was going to make my own with a more ram-air effect from the opening by the radaitor.
Anyone working on this??
Maybe some after market stuff? I was going to make my own with a more ram-air effect from the opening by the radaitor.
Anyone working on this??
#4
Premium Supporting Vendor
Member Since: Oct 2001
Location: Dallas Tx
Posts: 8,392
Received 571 Likes
on
292 Posts
St. Jude Vendor Donor '03-'04-'05-'06-'07-'08-'09-'10-'11
Hi GUys,
Yes, we did have some early spindle ducts that had the holes punched wrong. So dont fret. All the new 3" ducts fit properly.
And we are finishing up the details on the 3.5" ducts too.
That was a good link that Randy put up. And we have fixed any production problems that we were made aware of.
Thanks and keep it cool.
LG
Yes, we did have some early spindle ducts that had the holes punched wrong. So dont fret. All the new 3" ducts fit properly.
And we are finishing up the details on the 3.5" ducts too.
That was a good link that Randy put up. And we have fixed any production problems that we were made aware of.
Thanks and keep it cool.
LG
__________________
LG Pro LT Headers, MOST HP, MOST TORQUE
http://lgmotorsports.com/gallery/alb...no_compare.jpg
LGM http://www.LGMotorsports.com
Winner Daytona 250
22 WC Wins
"Most powerful Corvette headers on the planet"
LG Pro LT Headers, MOST HP, MOST TORQUE
http://lgmotorsports.com/gallery/alb...no_compare.jpg
LGM http://www.LGMotorsports.com
Winner Daytona 250
22 WC Wins
"Most powerful Corvette headers on the planet"