**TTPerformance Custom Metal Fab, Corner Balance + Alignments - Pics Inside
#1
Supporting Vendor
Thread Starter
Member Since: Jan 2004
Location: Little Falls NJ
Posts: 529
Likes: 0
Received 0 Likes
on
0 Posts
**TTPerformance Custom Metal Fab, Corner Balance + Alignments - Pics Inside
Custom Corner Balance + Alignments In-House. Setup your car for Road Course/Autocross/Drag Racing/Street.
Here are some of our new services including pricing:
Snap-On VD31 Aligner: Custom Alignments setup for Road Race, Street, Strip, Auto-cross, Standing Mile, Etc.
- All vehicles, capability for 2/4-wheel alignments.
- Cradle Alignments for 04-06 GTOs
Intercomp LCD w/ Printout Scales
- 4 Corner Individual Weights with Full Vehicle Weight
- Capability to corner balance any vehicle depending on application.
- Before/After printouts of corner balance reports.
Full Custom Suspension Items
- All suspension items are bent & TIG'd in-house.
- 4130 and M/Steel applications
- F-Body jigs are already in the making - Rear lower control arms, panhard bar, torque arm, front a-arms upper/lower, k-member, sfcs, stbs, etc.
- Powdercoating
Rollbar/Rollcage/SFI Fabrication
- Everything from Harness Bars to Full Blown 25.2 Certified Chassis Cars.
- Bent in-house, custom fit to every car for most clearance and per driver. No bolt-in general kit for all driver height's and seat preferences.
- Custom Seat Installation
- Custom Window Nets In-House
- Custom PRO/Outlaw Wheelie Bar Kits
On-Site Race Track Tuning
- For the serious enthusiast!
- Even though Jay can work his magic in-house here, there is nothing like tuning in the real world environment. Jay is available for on-site road race or drag strip suspension tuning.
- Matt is available for all on-site tuning for all road race and drag race vehicles.
Labor Rates:
Alignment: $105/hour. Included for rack time and inspection.
Scaling (Just Vehicle Weight): $125.00
Corner balance: $105/hour
- Scale Setup Fee: $50.00
Full Fabricated Suspension Items In-House. Control Arms
On-Site Tuning: Rates based on per job basis. Discounts given for current customers.
Here are some of our new services including pricing:
Snap-On VD31 Aligner: Custom Alignments setup for Road Race, Street, Strip, Auto-cross, Standing Mile, Etc.
- All vehicles, capability for 2/4-wheel alignments.
- Cradle Alignments for 04-06 GTOs
Intercomp LCD w/ Printout Scales
- 4 Corner Individual Weights with Full Vehicle Weight
- Capability to corner balance any vehicle depending on application.
- Before/After printouts of corner balance reports.
Full Custom Suspension Items
- All suspension items are bent & TIG'd in-house.
- 4130 and M/Steel applications
- F-Body jigs are already in the making - Rear lower control arms, panhard bar, torque arm, front a-arms upper/lower, k-member, sfcs, stbs, etc.
- Powdercoating
Rollbar/Rollcage/SFI Fabrication
- Everything from Harness Bars to Full Blown 25.2 Certified Chassis Cars.
- Bent in-house, custom fit to every car for most clearance and per driver. No bolt-in general kit for all driver height's and seat preferences.
- Custom Seat Installation
- Custom Window Nets In-House
- Custom PRO/Outlaw Wheelie Bar Kits
On-Site Race Track Tuning
- For the serious enthusiast!
- Even though Jay can work his magic in-house here, there is nothing like tuning in the real world environment. Jay is available for on-site road race or drag strip suspension tuning.
- Matt is available for all on-site tuning for all road race and drag race vehicles.
Labor Rates:
Alignment: $105/hour. Included for rack time and inspection.
Scaling (Just Vehicle Weight): $125.00
Corner balance: $105/hour
- Scale Setup Fee: $50.00
Full Fabricated Suspension Items In-House. Control Arms
On-Site Tuning: Rates based on per job basis. Discounts given for current customers.
#3
Supporting Vendor
Thread Starter
Member Since: Jan 2004
Location: Little Falls NJ
Posts: 529
Likes: 0
Received 0 Likes
on
0 Posts
John: From the masses! We have been so busy that I have not been active on this forum for a little while. I will be updating some cool projects we have going on now 383ci 10-rib novi 2000, 402ci 8-rib novi 2000, 427ci lsx twin turbo... On top of all the other NA projects and other vehicles that we work on.
If you are interested, give us a shout!
If you are interested, give us a shout!