C5 Z track car for sale
#1
Racer
Thread Starter
Member Since: Dec 2004
Location: Jacksonville FL
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
C5 Z track car for sale
I have an 01 Z track car for sale. Built by MTI and was Reeses personal car.
The car is still streetable but I drive it only on track days.
The engine is fresh with cam, headers, full exhaust, callaway intake, polished throttle body, makes right at 445 RWHP on a full safe tune. Car sounds amazing.
Dewitt radiator, tranny cooler, brake ducts, full wilwoods, SS brake lines, accusump oil.
Inside there is a 4 pt roll cage, race seats, removable wheel, 6 pts.
More to list and I have pictures that I can e mail. Its a great car and I just dont have the time to use it. Also have a Pace 24ft trailer in matching black if anyone is interested in the set.
E mail me at mark@ackb.com if you are truly interested and we can talk about the other specs and get you some pictures. Price will be 35k.
The car is still streetable but I drive it only on track days.
The engine is fresh with cam, headers, full exhaust, callaway intake, polished throttle body, makes right at 445 RWHP on a full safe tune. Car sounds amazing.
Dewitt radiator, tranny cooler, brake ducts, full wilwoods, SS brake lines, accusump oil.
Inside there is a 4 pt roll cage, race seats, removable wheel, 6 pts.
More to list and I have pictures that I can e mail. Its a great car and I just dont have the time to use it. Also have a Pace 24ft trailer in matching black if anyone is interested in the set.
E mail me at mark@ackb.com if you are truly interested and we can talk about the other specs and get you some pictures. Price will be 35k.
#3
Racer
Thread Starter
Member Since: Dec 2004
Location: Jacksonville FL
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
Yup, thats it. Its been in some magazines and stuff. Pretty famous car I gather.
Here are the specs:
MTI Racing 2001, C5 Z06-(Track Setup)
Engine: Stage 1
1. MTI RACING stainless steel long tube headers with extra thick head flanges, .060" wall tubing / matched primary tubes ( Please Note: This is a "New" design ) High-Flow Metal Matrix cats
2. Stainless Steel X-pipe
3. MTI Racing “Dominator” Custom cat-back exhaust system
4. Callaway "Honker" Cold Air induction
5. MTI RACING ported throttle body
6. MTI RACING spark plug wires
7. Denso Iridium Spark Plugs
8. 160 / 180 degree thermostat
9. Accusump Oil System
Engine: Stage II-(upgrade from the stage I)
1. MTI Racing Custom Ported/Re-worked Cylinder Heads-(Complete Disassembly of Heads and Valve train, Complete Cleaning Process performed, Complete Port and Polish of both Intake and Exhaust runners, Reassembly)
2. MTI Racing Custom Profile Camshaft
3. CNC Titanium Retainers
4. Competition Valve Springs With Hardened Locks
5. Manley 4340 Chromemoly Pushrods
6. Competition Spec. Double Roller timing Chain
7. MTI Racing/ Melling ported oil pump
8. MTI Racing Underdrive Damper Kit
9. All ARP studs and bolts were used in the building of the engine
10. Completely Dyno Tuned, Reprogrammed and Road Tested by Reese *** Himself.
11. Car makes 443 RWHP and 404 RWTQ
Transmission & Rear end: Spec Racing-Stage 3 clutch and aluminum Flywheel.
Fresh MTI Racing Performance Rebuild on Transmission and Differential w hardened 3:42 Ring & Pinion stock Repl. Output Shafts
Brakes: Competition stage IV
1. Wilwood Full Competition compound track pads
2. Wilwood 6 Piston Monoblock Racing Brake Calipers Front, 4 Piston Monoblock Rear
3. Goodridge Braided Stainless Lines
4. Wilwood High-Temp Fluid
5. All new Stainless steel hardware
Suspension: Stage IV
1. Either Phadt or Penske coil overs will come with the car not installed
2. MTI Racing-Competition Sway bars with hiem-jointed end links
3. Full Chassis Set-up: Lowered, Corner balanced, and Completely Track Aligned
Miscellaneous
Oversized aluminum racing radiator and oil cooler
Electric Transmission cooler
Brake ducts
Fire extinguisher and bracket
Video Camera mount
Safety-Equipment:
1. Custom MTI Racing competition legal 5pt Roll cage(Powder coated)
2. G-Force Racing 4Pt. Camlock Harnesses (X2)
3. Momo wheel with quick release
4. Custom upholstered Sparco Evo 2 Racing Seats
Wheels & Tires:
3PC. Limited Edition Lightweight Forgeline WC3P Wheels w/ Black Centers
BF Goodrich street tires.
Here are the specs:
MTI Racing 2001, C5 Z06-(Track Setup)
Engine: Stage 1
1. MTI RACING stainless steel long tube headers with extra thick head flanges, .060" wall tubing / matched primary tubes ( Please Note: This is a "New" design ) High-Flow Metal Matrix cats
2. Stainless Steel X-pipe
3. MTI Racing “Dominator” Custom cat-back exhaust system
4. Callaway "Honker" Cold Air induction
5. MTI RACING ported throttle body
6. MTI RACING spark plug wires
7. Denso Iridium Spark Plugs
8. 160 / 180 degree thermostat
9. Accusump Oil System
Engine: Stage II-(upgrade from the stage I)
1. MTI Racing Custom Ported/Re-worked Cylinder Heads-(Complete Disassembly of Heads and Valve train, Complete Cleaning Process performed, Complete Port and Polish of both Intake and Exhaust runners, Reassembly)
2. MTI Racing Custom Profile Camshaft
3. CNC Titanium Retainers
4. Competition Valve Springs With Hardened Locks
5. Manley 4340 Chromemoly Pushrods
6. Competition Spec. Double Roller timing Chain
7. MTI Racing/ Melling ported oil pump
8. MTI Racing Underdrive Damper Kit
9. All ARP studs and bolts were used in the building of the engine
10. Completely Dyno Tuned, Reprogrammed and Road Tested by Reese *** Himself.
11. Car makes 443 RWHP and 404 RWTQ
Transmission & Rear end: Spec Racing-Stage 3 clutch and aluminum Flywheel.
Fresh MTI Racing Performance Rebuild on Transmission and Differential w hardened 3:42 Ring & Pinion stock Repl. Output Shafts
Brakes: Competition stage IV
1. Wilwood Full Competition compound track pads
2. Wilwood 6 Piston Monoblock Racing Brake Calipers Front, 4 Piston Monoblock Rear
3. Goodridge Braided Stainless Lines
4. Wilwood High-Temp Fluid
5. All new Stainless steel hardware
Suspension: Stage IV
1. Either Phadt or Penske coil overs will come with the car not installed
2. MTI Racing-Competition Sway bars with hiem-jointed end links
3. Full Chassis Set-up: Lowered, Corner balanced, and Completely Track Aligned
Miscellaneous
Oversized aluminum racing radiator and oil cooler
Electric Transmission cooler
Brake ducts
Fire extinguisher and bracket
Video Camera mount
Safety-Equipment:
1. Custom MTI Racing competition legal 5pt Roll cage(Powder coated)
2. G-Force Racing 4Pt. Camlock Harnesses (X2)
3. Momo wheel with quick release
4. Custom upholstered Sparco Evo 2 Racing Seats
Wheels & Tires:
3PC. Limited Edition Lightweight Forgeline WC3P Wheels w/ Black Centers
BF Goodrich street tires.
#4
Cruising
Member Since: Aug 2006
Location: cape coral fl
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
#5
I have an 01 Z track car for sale. Built by MTI and was Reeses personal car.
The car is still streetable but I drive it only on track days.
The engine is fresh with cam, headers, full exhaust, callaway intake, polished throttle body, makes right at 445 RWHP on a full safe tune. Car sounds amazing.
Dewitt radiator, tranny cooler, brake ducts, full wilwoods, SS brake lines, accusump oil.
Inside there is a 4 pt roll cage, race seats, removable wheel, 6 pts.
More to list and I have pictures that I can e mail. Its a great car and I just dont have the time to use it. Also have a Pace 24ft trailer in matching black if anyone is interested in the set.
E mail me at mark@ackb.com if you are truly interested and we can talk about the other specs and get you some pictures. Price will be 35k.
The car is still streetable but I drive it only on track days.
The engine is fresh with cam, headers, full exhaust, callaway intake, polished throttle body, makes right at 445 RWHP on a full safe tune. Car sounds amazing.
Dewitt radiator, tranny cooler, brake ducts, full wilwoods, SS brake lines, accusump oil.
Inside there is a 4 pt roll cage, race seats, removable wheel, 6 pts.
More to list and I have pictures that I can e mail. Its a great car and I just dont have the time to use it. Also have a Pace 24ft trailer in matching black if anyone is interested in the set.
E mail me at mark@ackb.com if you are truly interested and we can talk about the other specs and get you some pictures. Price will be 35k.
Please respond to gbramage@comcast.net
Thanks, Geoff
#7
Racer
Thread Starter
Member Since: Dec 2004
Location: Jacksonville FL
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
Bump.
If anybody has not recieved a reply please make sure you sent the inquiry to mark@ackb.com.
Thanks for all the interest in the car and if there are any more questions let me know.
If anybody has not recieved a reply please make sure you sent the inquiry to mark@ackb.com.
Thanks for all the interest in the car and if there are any more questions let me know.
#10
Racer
Thread Starter
Member Since: Dec 2004
Location: Jacksonville FL
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
The price is very very reasonable to say the least. But I just want someone to buy it and enjoy it. Its a great car. Then we can go on to the little midget racing.....ie Miatas
#13
Le Mans Master
#14
please email me more pics, and some interior photo's as well. Thanks.
wpuricelli@advancedexterminating.com
wpuricelli@advancedexterminating.com
#15
Drifting
#16
Le Mans Master
Oh yeah - my wife on her Nightster can take you on
Mr. Market is allowing me to buy cheap for my retirement and will allow huge gains on what I already have in hand (so to speak - it is taking smaller hands these days)....
#17
Racer
Thread Starter
Member Since: Dec 2004
Location: Jacksonville FL
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
Hey hey hey.......no market or investment analysis here......we are talking about selling the only vette in the Southeast that can beat Jeff around the track......
Someone buy this darn thing before I decide to keep it.......
Someone buy this darn thing before I decide to keep it.......