A few pics of the final car! Cold weather kept it off the track today
#1
Le Mans Master
Thread Starter
A few pics of the final car! Cold weather kept it off the track today
Special thanks to Adam 'SOLO' Boca for an awesome paint job!
Special thanks to Jason & Katech for helping me build one of the fastest road race corvettes around!
Here are pics of the final scheme. I will be adding Katech decals shortly which will be the last addition.
Here are a few that were taken today.
The entire thread is here:
http://forums.corvetteforum.com/show....php?t=1985327
I hope to see many of you at the Katech Track Attack May 3, 4, NCM VIR,NCM RA and NCM Putnam!
Mike
Special thanks to Jason & Katech for helping me build one of the fastest road race corvettes around!
Here are pics of the final scheme. I will be adding Katech decals shortly which will be the last addition.
Here are a few that were taken today.
The entire thread is here:
http://forums.corvetteforum.com/show....php?t=1985327
I hope to see many of you at the Katech Track Attack May 3, 4, NCM VIR,NCM RA and NCM Putnam!
Mike
#2
Racer
Member Since: Sep 2006
Location: San Angelo TX
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '08-'10
i would say you stole my number...but
yours is painted on mine is not...
and well your car is 100000x better than mine so i will just stick with i am sharing my number with a GREAT CAR!
looks like fun!
yours is painted on mine is not...
and well your car is 100000x better than mine so i will just stick with i am sharing my number with a GREAT CAR!
looks like fun!
#12
Le Mans Master
Thread Starter
#14
Le Mans Master
Thread Starter
Thank you John,
The helmet is fitted for a cooling system. There are two tubes coming from the rear cooler. As you know, cool suits accept cold water but the helmet tube pumps in cold air. The helmet is also fitted for a motorized drink straw activated by a steering wheel button.
My other helmet is an Arai GP5 and has the same fitting but on the side as top mounting was not an option on that model.
Top mounting provides better airflow to the persons head. The helmet pictured is a Bell Infusion.
Here's a closer shot and you can see the straw fitting in front.
Mike
The helmet is fitted for a cooling system. There are two tubes coming from the rear cooler. As you know, cool suits accept cold water but the helmet tube pumps in cold air. The helmet is also fitted for a motorized drink straw activated by a steering wheel button.
My other helmet is an Arai GP5 and has the same fitting but on the side as top mounting was not an option on that model.
Top mounting provides better airflow to the persons head. The helmet pictured is a Bell Infusion.
Here's a closer shot and you can see the straw fitting in front.
Mike
#16
Le Mans Master
Thread Starter
Thank you,
I'm sure it will take me a few months to sort out but I'm looking forward to the learning experience and progressing from how it ran last year.
Mike
#17
Le Mans Master
Thread Starter
Right now I will use it primarily at Autobahn and enjoy trying to set it up properly. I wanted to build an absolute monster purely for recreation given my daily track access. I may run a few SPOs events with it.
I have a T-1 car (Al Longtin's old car) I will race this year in SCCA and NASA. That will be a little cheaper of a program.
Mike
I have a T-1 car (Al Longtin's old car) I will race this year in SCCA and NASA. That will be a little cheaper of a program.
Mike
#20
Team Owner
Thank you John,
The helmet is fitted for a cooling system. There are two tubes coming from the rear cooler. As you know, cool suits accept cold water but the helmet tube pumps in cold air. The helmet is also fitted for a motorized drink straw activated by a steering wheel button.
My other helmet is an Arai GP5 and has the same fitting but on the side as top mounting was not an option on that model.
Top mounting provides better airflow to the persons head. The helmet pictured is a Bell Infusion.
Here's a closer shot and you can see the straw fitting in front.
Mike
The helmet is fitted for a cooling system. There are two tubes coming from the rear cooler. As you know, cool suits accept cold water but the helmet tube pumps in cold air. The helmet is also fitted for a motorized drink straw activated by a steering wheel button.
My other helmet is an Arai GP5 and has the same fitting but on the side as top mounting was not an option on that model.
Top mounting provides better airflow to the persons head. The helmet pictured is a Bell Infusion.
Here's a closer shot and you can see the straw fitting in front.
Mike
Last edited by John Shiels; 04-02-2008 at 02:20 PM.