Red5

Rotating mass.... Two words that mean a Lot on the track. These were used as my rain tires. The tires have a LOT of life left. They still have the little dimples on them. I'm thinking less than 1k miles.

The wheels seem tobe in very good condition. They may need a good cleaning but there is little to 0 curb rash or anything like that. And teh wheels are true. Balanced and ready to go. You can run them as street wheels all day any day.

The tires are Summitomo HTR 35 Z rated 315/35/17s all the way around. Purchased earlier THIS SUMMER. A great compound for entering a street tire class autocross or even a track day event.

If I were to put rce tires on I'd stagger 315s up front and 335s in the rear. These wheels fit with no spacers required.

These will make someone a great set of streets or a great set of road race wheels. Asking $2400 and can ship them anywhere.

I can be reached at Supervetteracer@aol.com.

Red5

obo

Red5

New price... $2000.00 before they go to ebay.

ERND IT

photos?

66IISS

Do you know what the backspacing is? Will they fit a C4?

Tavarez

Out of curiosity, would something like this fit a c6 z06?

Z06Fix

17's will not clear the brakes on a C6 Z06.

Red5

Pictures:

crznZ06

Can you turn the front wheels from lock to lock without the insides of the wheels rubbing on the lower control arms?

Red5

Almost allthe way, but if you go complete lock to lock they will touch the lower control arms. You can cut away about 1 CM and solve this. Or you can just not turn the wheel all the way to the lock.

I own two sets of CCWs and these are less likely to touch than my others.