Wheels and tires for super stock Z06
#1
Drifting
Thread Starter
Wheels and tires for super stock Z06
http://forums.corvetteforum.com/show...959&highlight=
I am selling a set of OEM Z06 wheels and Hoosier A6 tires. I am finally moving to a C6 Z06!
I am selling a set of OEM Z06 wheels and Hoosier A6 tires. I am finally moving to a C6 Z06!
#2
Burning Brakes
Member Since: Jul 2004
Location: MD
Posts: 767
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '10-'11
Can't act on your offer, but I hope to get some take off R6's with decent life left that will fit on stock C5Z06 rims ... so question is ... what sizes were/are the A6's you have/had on stock rims?
Thanks,
:
Thanks,
:
Last edited by MungoZ06; 08-11-2008 at 05:29 PM. Reason: spelling
#4
Congrats with the car purchase. Just hope you won't be autoxing the C6Z06----because for autox it's slower than the car you sold-----but only for autox.
Good Luck with the car. Did you get a 1LZ or did you go with all the heavy junk ?
Good Luck with the car. Did you get a 1LZ or did you go with all the heavy junk ?
#5
Drifting
Thread Starter
Mungo - The tires are 275 front and 315s on the rears. Over the years I have had many different sizes and brands and this combination worked great for me.
Lehman - I have to disagree. We have long, high speed courses here in El Paso and the c6 Z06 is a faster car about 95% of the time. I haven't purchased the new Z yet, I am searching for a combination that I like as much as the last one.
Thanks guys.
Lehman - I have to disagree. We have long, high speed courses here in El Paso and the c6 Z06 is a faster car about 95% of the time. I haven't purchased the new Z yet, I am searching for a combination that I like as much as the last one.
Thanks guys.
#6
Burning Brakes
Member Since: Jul 2004
Location: MD
Posts: 767
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '10-'11
Thanks ... Appears that either will work for front, and will pair with the 315 rears.
But, should one opt for 295 rears, for AH considerations (f/r diameters), the fronts would need to be 295's as well.
FRONTS:
P275/40ZR17 M 10.3" 25.5"
P295/35ZR17 M 10.8" 25.3"
REARS:
P295/30ZR18 M 10.8" 25.3"
P315/30ZR18 M 11.8" 25.6"
Regards,
Denny
But, should one opt for 295 rears, for AH considerations (f/r diameters), the fronts would need to be 295's as well.
FRONTS:
P275/40ZR17 M 10.3" 25.5"
P295/35ZR17 M 10.8" 25.3"
REARS:
P295/30ZR18 M 10.8" 25.3"
P315/30ZR18 M 11.8" 25.6"
Regards,
Denny