Shock dyno charts for 04 z06 oem shocks?
#1
Race Director
Thread Starter
Shock dyno charts for 04 z06 oem shocks?
Does anyone have these to post or email to me? I've got 3 sets of shocks I'm playing with & trying to get more "objective" & less SOTP with the analysis.
Thanks!
Thanks!
#2
Le Mans Master
Member Since: Feb 2000
Location: Bedford NH
Posts: 5,708
Likes: 0
Received 1 Like
on
1 Post
Cruise-In II Veteran
I only have C6 T1 and C6-ZO6 dyno data. The first plots shown here are the C6 T1:
http://forums.corvetteforum.com/show....php?t=2071172
http://forums.corvetteforum.com/show....php?t=2071172
#3
Race Director
Thread Starter
I only have C6 T1 and C6-ZO6 dyno data. The first plots shown here are the C6 T1:
http://forums.corvetteforum.com/show....php?t=2071172
http://forums.corvetteforum.com/show....php?t=2071172
Thanks ! Maybe someone else has some. I may get some done by ProParts out here in SoCal , but it gets expensive with 12 shocks to do.
#4
Former Vendor
Member Since: Nov 2007
Location: Salt Lake City Utah
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '08
Autocross & Roadrace Forum Sponsor
Would be happy to help.
So you are looking for dyno curves for '04 Z06 shocks and what other 2 sets?
I can try and round up the shocks you are looking for and dyno them, if I don't already have the data handy.
It sure is nice having a shock dyno in the lobby.
Just let me know what data you are looking for and I will see what I can do.
I can try and round up the shocks you are looking for and dyno them, if I don't already have the data handy.
It sure is nice having a shock dyno in the lobby.
Just let me know what data you are looking for and I will see what I can do.
#5
Burning Brakes
Member Since: Nov 2006
Location: Goose Creek SC
Posts: 1,071
Likes: 0
Received 0 Likes
on
0 Posts
So you are looking for dyno curves for '04 Z06 shocks and what other 2 sets?
I can try and round up the shocks you are looking for and dyno them, if I don't already have the data handy.
It sure is nice having a shock dyno in the lobby.
Just let me know what data you are looking for and I will see what I can do.
I can try and round up the shocks you are looking for and dyno them, if I don't already have the data handy.
It sure is nice having a shock dyno in the lobby.
Just let me know what data you are looking for and I will see what I can do.
Don
#6
Former Vendor
Member Since: Nov 2007
Location: Salt Lake City Utah
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '08
Autocross & Roadrace Forum Sponsor
#9
Former Vendor
Member Since: Nov 2007
Location: Salt Lake City Utah
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '08
Autocross & Roadrace Forum Sponsor
Status update
OK, we have been very busy around here trying to put together some good information for everyone. We are trying to have everything together by today and have everything posted either later today or tomorrow.
So get your pop corn ready and stay tuned!
So get your pop corn ready and stay tuned!
#10
Z51 bushings crush down?
Sorry to all for diverting this thread.
Thanks
#11
Former Vendor
Member Since: Nov 2007
Location: Salt Lake City Utah
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '08
Autocross & Roadrace Forum Sponsor
Otp
We don't make bushing for the Z06 rear sway bar. The reason is that the Z06 rear sway bar is too stiff for the front sway bar and causes oversteer.
#12
Former Vendor
Member Since: Nov 2007
Location: Salt Lake City Utah
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '08
Autocross & Roadrace Forum Sponsor
#13
Drifting
Josh,
I have 04 ZO6 shocks on my car. They have about 600 miles on them.
When we put the Pfadt Sport shocks on you can have these to test if you need them.
J.R.
I have 04 ZO6 shocks on my car. They have about 600 miles on them.
When we put the Pfadt Sport shocks on you can have these to test if you need them.
J.R.
#14
Former Vendor
Member Since: Nov 2007
Location: Salt Lake City Utah
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '08
Autocross & Roadrace Forum Sponsor