TTPMatt

As TTP Motorsports moves into the next year, we have found the need for a larger facility.

We are excited to move from our current 2700 square foot location with barely any parking to the Little Falls at over 5000 square feet, with 15+ customer spaces.

The location is:

5 Cardinal Drive
Little Falls NJ 07424

5000 square feet, enough to support full inventory, 4 double bays (8 car bays), clean room, equipment storage, 1k+ sq ft of parts inventory/storage, 1k+ office space including new customer waiting rooms with LCD TV's and Forza2 on all the time

Here are a few pics from the outside, it is deceiving as the main shop floor is 40'x100', each bay door has room to support two lifts each.

Wicked Weasel

Matt good luck with your new location.

Bob

turbo50mike

Dyno??

devil z

are you going to pay for the extra gas it takes me to get to your new shop

John Shiels

Good Luck on the new shop! Congratulations!

TTPMatt

turbomike: We will be traveling with our current Dynojet 224x to the new site. We will be adding the additional dyno with the 424x AWD option in the near future along with the ELC option.

devil z: Use 6th gear more not all of 2nd,3rd,4th to get here

Thanks guys...

- Matt

RUN4CVR

Good luck with your move, althought I'd say you need more room from where you are you know the new place is just going to fill up the same way.

As Carlin used to say: "buying a bigger house means you can get more sh*t!"

TTPMatt

LOL. Yes we will be jamming more crap into this shop. The main thing is the Motorsports division of our company has taken off so much that we need the room to support all the work. My current shop is not efficient, its like a damn jigsaw puzzle. We run full maintenance, storage, and dedicated technicians for our road/drag race specialty customers so we need more room than this 2700 sq ft puzzle.

With our new building, we will be focusing in on the Road & Drag Race market, specifically LSx vehicles. By no means dropping any focus on the street, this just means we will have further R&D for our street guys and specific mechanics to deal with everyone's needs.

It is still being planned but I have room for 8 lifts without a question and that is including the current dynojet 224x 4-post lift and the Hunter aligner lift for the SnapOn aligner. We also have additional trailer storage room for our customers that travel distances and would prefer to keep their trailer on our site until the work is complete.

Big things are happening here, and it's all thanks to you guys supporting us.

- Matt

kingkyle

Sweet location!! even closer to me

Also, more room for the War Machine to be kept inside away from the rain (running paint)