New Quantum Spindle Ducts
09-18-2008, 02:42 PM
#1
Former Vendor
Thread Starter
Member Since: Mar 2007
Location: Highland IN
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
New Quantum Spindle Ducts
We are proud to introduce our new C6 Z06 Competition Brake Cooling Kits on this forum. Along with the introduction we are offering forum members special pre-order discount pricing not found on our website.
The plates were designed in SolidWorks using CAD data direct from GM. Fit and finish is perfect.
They install without removal of the hubs and use existing holes as mounting points. We supply an additional support bracket, (shown on the back side of the spindle) to secure the duct near the caliper.
We assure you they will not move or flex, and are simple to install.
The kits include everything you need.
You will not find a higher quality duct for the Corvette.
Front Duct Plate Kit - $105.00 + Shipping
Front Street Kit - $135.00 + Shipping (includes hose)
Front Race Kit - $165.00 + Shipping (includes hose)
They are constructed of 6061-T6 Aluminum and are TIG welded. Tube size is 3" OD.
Mounting hardware is Grade 8 zinc coated. Overkill we know, but it doesn't cost us much more to supply better hardware so we do.
These plates are in production right now. Get your orders in and save.
We are working on C5 Z06 / Base C6 Competition Ducts. They should be out later this month.
Jon Lambert
Quantum Motorsports
The plates were designed in SolidWorks using CAD data direct from GM. Fit and finish is perfect.
They install without removal of the hubs and use existing holes as mounting points. We supply an additional support bracket, (shown on the back side of the spindle) to secure the duct near the caliper.
We assure you they will not move or flex, and are simple to install.
The kits include everything you need.
You will not find a higher quality duct for the Corvette.
Front Duct Plate Kit - $105.00 + Shipping
Front Street Kit - $135.00 + Shipping (includes hose)
Front Race Kit - $165.00 + Shipping (includes hose)
They are constructed of 6061-T6 Aluminum and are TIG welded. Tube size is 3" OD.
Mounting hardware is Grade 8 zinc coated. Overkill we know, but it doesn't cost us much more to supply better hardware so we do.
These plates are in production right now. Get your orders in and save.
We are working on C5 Z06 / Base C6 Competition Ducts. They should be out later this month.
Jon Lambert
Quantum Motorsports
Last edited by Lambert_Automotive; 09-18-2008 at 03:47 PM.
09-18-2008, 03:48 PM
#2
Race Director
Member Since: Oct 1999
Location: www.ncminsurance.com Bowling Green KY Home of the Corvette!
Posts: 14,109
Received 126 Likes
on
66 Posts
CI 1-2-3-4-5-6-7-8-9-10-11-12 Vet
St. Jude Donor '07-'08
NCM Sinkhole Donor
Jon is great to work with....I have one of the first sets on my car and have run them for a year now...
Great product!
Adam
Great product!
Adam
09-19-2008, 11:22 AM
#3
Former Vendor
Thread Starter
Member Since: Mar 2007
Location: Highland IN
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Adam,
Great to hear from you! We will be headed to Petite again this year, hope to stop and see you on the way. It's always nice to visit where vettes are born at least once a year....
Jon
Great to hear from you! We will be headed to Petite again this year, hope to stop and see you on the way. It's always nice to visit where vettes are born at least once a year....
Jon
10-15-2008, 06:52 PM
#4
Burning Brakes
Member Since: May 2002
Location: brooklyn ny
Posts: 970
Likes: 0
Received 0 Likes
on
0 Posts
I have the quantum kit, Perfect fit. No removing the spindle, opening the ball joint. Installs in no time. Engineering at its finest. Donot hesitate to get these.
10-17-2008, 10:14 PM
#7
Melting Slicks
