Racer Buzz

For Sale: Corvette Autocross Wheel & Tire Set-Up

I have a mixed set of 2-Mallett & 2-Corvette wheels & 4-Hoosier AX Autocross tires w/Corvette tire pressure sensors.

FRONTS:
Two 1998 Corvette stock rear (18” x 9.5”) wheels with a 7.75” backspace & a 2.00” offset mounted with two Hoosier 275/35 ZR 18” used AX Autocross “A3S03” compound with Corvette tire pressure sensors

AND

REARS:
Two Mallett chrome rear (18” x 11”) wheels with a 8.25” backspace & a 3.00” offset mounted with two Hoosier 335/30 ZR 18” used AX / Autocross “A3S03” compound with Corvette tire pressure sensors

These are located in Ft Lauderdale, FL 33324

$850.00 OBO

0MrPickles

S03 tires are REALLY old tires... I mean well over 5 years since they were being produced. Hoosiers do not age very well, especially with long periods of time between heat cycles.

You would be lucky to get $40 a tire, without the rims. Since the S03 are 3-generations of A compound tires...old.

Good luck with the sale

AverageVetteNut

might be fun for local events

Very sharp wheels and good luck with the sale. Just bought a set of A6's

Leo z51

Will the rears fit on a stock 07 C6 without hanging out of the fenders?

Racer Buzz

A C6 has a bunch more wheel & tire clearance than a C5.

I did trim the inside fenderwell liners of my C5 with an xacto knife for another 1" of inside clearance to the frame rails..