FS T1 Springs & Shocks
06-22-2009, 02:03 PM
#1
Pro
Thread Starter
FS T1 Springs & Shocks
I have both front and rear springs and 2 Fr shocks and 1 Rr shock available.
New Price $50 per shock - Sachs T1 - Still available
New Price $440 per T1 Sping - SPRINGS ARE SOLD!
It was hard to find market prices for these so this is what i believe the prices range when new...
New T1 springs go for $900 - $1070/ea
New T1 shocks go for $110 - $150/ea.
Note buyer pays shipping and paypal fees
Thanks,
Chuck
You can email me at cwasserott@***.net.
New Price $50 per shock - Sachs T1 - Still available
New Price $440 per T1 Sping - SPRINGS ARE SOLD!
It was hard to find market prices for these so this is what i believe the prices range when new...
New T1 springs go for $900 - $1070/ea
New T1 shocks go for $110 - $150/ea.
Note buyer pays shipping and paypal fees
Thanks,
Chuck
You can email me at cwasserott@***.net.
Last edited by Wasserott; 11-02-2009 at 02:45 PM. Reason: New Price
06-24-2009, 11:16 AM
#5
Pro
Thread Starter
Froggy47-The T1 Sachs shocks were designed to work with the T1 spring rates. I don't know that much about the 04 Z06 shocks to have a comparison but i do know that the T1 Spring rates are higher than Z06.
PN's:
12480063 - Spring, Front T-1 Corvette
12480064 - Spring, Rear T-1 Corvette
12480094 - Shock T-1 Front
12480095 - Shock, T-1 Rear
9707Vette - All I have are the springs and these 3 shocks. I don't have the control arms available. I can tell you that i don't believe the control arms make that much difference. I've been running one side with my stock arms and the other with T1. No problems or differences to report.
Still available so let me know if you have an interest.
Chuck
PN's:
12480063 - Spring, Front T-1 Corvette
12480064 - Spring, Rear T-1 Corvette
12480094 - Shock T-1 Front
12480095 - Shock, T-1 Rear
9707Vette - All I have are the springs and these 3 shocks. I don't have the control arms available. I can tell you that i don't believe the control arms make that much difference. I've been running one side with my stock arms and the other with T1. No problems or differences to report.
Still available so let me know if you have an interest.
Chuck
Last edited by Wasserott; 06-24-2009 at 11:35 AM.
07-14-2009, 04:37 PM
#10
Drifting
Froggy47-The T1 Sachs shocks were designed to work with the T1 spring rates. I don't know that much about the 04 Z06 shocks to have a comparison but i do know that the T1 Spring rates are higher than Z06.
PN's:
12480063 - Spring, Front T-1 Corvette
12480064 - Spring, Rear T-1 Corvette
12480094 - Shock T-1 Front
12480095 - Shock, T-1 Rear
9707Vette - All I have are the springs and these 3 shocks. I don't have the control arms available. I can tell you that i don't believe the control arms make that much difference. I've been running one side with my stock arms and the other with T1. No problems or differences to report.
Still available so let me know if you have an interest.
Chuck
PN's:
12480063 - Spring, Front T-1 Corvette
12480064 - Spring, Rear T-1 Corvette
12480094 - Shock T-1 Front
12480095 - Shock, T-1 Rear
9707Vette - All I have are the springs and these 3 shocks. I don't have the control arms available. I can tell you that i don't believe the control arms make that much difference. I've been running one side with my stock arms and the other with T1. No problems or differences to report.
Still available so let me know if you have an interest.
Chuck
07-20-2009, 07:52 AM
#12
Drifting
I assume these are c5 springs and will not work with c6 cars
08-26-2009, 04:29 PM
#15
Melting Slicks
08-27-2009, 07:40 AM
#18
Pro
Thread Starter
Aaron - Not long at all with all the troubles i had with motors since i had Phoenix install them. I could count the time on the car in hours which i estimate between 3-4 hours.
Thanks for the interest and i hope to see you sometime in the future.
Thanks for the interest and i hope to see you sometime in the future.
08-27-2009, 08:47 AM
#19
Melting Slicks
