Corvette Z06 Polyurethane Bushing Kit - Close Out Sale!
08-28-2009, 06:08 PM
#1
Former Vendor
Thread Starter
Corvette Z06 Polyurethane Bushing Kit - Close Out Sale!
We have been able to get our hands on some close out polyurethane bushing kits for the C6Z and they are a great deal.
They originally sold for $350 / kit but we are offering them for $150.00 shipped.
There are only 34 kits and when they are gone they are gone.
Thanks for looking!
$150.00 Shipped!
08-29-2009, 01:30 AM
#2
Le Mans Master
Member Since: Dec 2006
Location: Phoenix Arizona
Posts: 7,251
Likes: 0
Received 14 Likes
on
14 Posts
We have been able to get our hands on some close out polyurethane bushing kits for the C6Z and they are a great deal.
They originally sold for $350 / kit but we are offering them for $150.00 shipped.
There are only 34 kits and when they are gone they are gone.
Thanks for looking!
$150.00 Shipped!
09-12-2009, 07:09 AM
#6
Hate to say it, but this guy is not a good supplier. After emailing Colton with a question, which he replied to immediately and based on your reco, I ordered a set. I received an order email and approval for payment email. I tore the car down since I have an event on the 19th (Putnam) and 27th (VIR). Now two emails later...nada....no response...nothing. My car sits in pieces. my credit card is charged $150. I searched the forum and now see he is jerking others around similarly.
We try to help the guy by buying his product and this is how he treats his customers. He says he has 34 sets and they will go fast...go fast where??????
Damn I'm pissed. Bet Aaron Pfatd is getting calls too since they are his closeout bushings.
We try to help the guy by buying his product and this is how he treats his customers. He says he has 34 sets and they will go fast...go fast where??????
Damn I'm pissed. Bet Aaron Pfatd is getting calls too since they are his closeout bushings.
09-14-2009, 01:53 PM
#7
Former Vendor
Thread Starter
Hate to say it, but this guy is not a good supplier. After emailing Colton with a question, which he replied to immediately and based on your reco, I ordered a set. I received an order email and approval for payment email. I tore the car down since I have an event on the 19th (Putnam) and 27th (VIR). Now two emails later...nada....no response...nothing. My car sits in pieces. my credit card is charged $150. I searched the forum and now see he is jerking others around similarly.
We try to help the guy by buying his product and this is how he treats his customers. He says he has 34 sets and they will go fast...go fast where??????
Damn I'm pissed. Bet Aaron Pfatd is getting calls too since they are his closeout bushings.
We try to help the guy by buying his product and this is how he treats his customers. He says he has 34 sets and they will go fast...go fast where??????
Damn I'm pissed. Bet Aaron Pfatd is getting calls too since they are his closeout bushings.
09-15-2009, 07:26 AM
#8
Just wrote you an e-mail... Your item was shipped we just forgot to tie your tracking number to your account. I really am sorry that you have not been happy with us I honestly do try my best to provide the best service i can. In my e-mail i have made an offer in an attempt to make up for the confusion.
Even after I said I would take a chance and wait for the first delivery on Thursday, he insisted that I go with the overnight if it would settle my mind....so I did.
Fellow forum members, please disregard my first post and take this post to bank....you can trust Corvette Recycling to provide the best service he can...even when there is a glitch.
Thanks Colton and sorry for my initial nasty post....Sam
09-15-2009, 07:38 AM
#9
Melting Slicks
Impatience always gets you in trouble........
Colton and the rest of the gang at Corvette Recycling are top notch vendors.
Hope everything works out and you guys make the event on Saturday.
Nice to hang out with the whole Corvette Recycling gang over the weekend at the NASA Nationals @ MMP
Colton and the rest of the gang at Corvette Recycling are top notch vendors.
Hope everything works out and you guys make the event on Saturday.
Nice to hang out with the whole Corvette Recycling gang over the weekend at the NASA Nationals @ MMP
09-15-2009, 07:52 AM
#10
Impatience always gets you in trouble........
Colton and the rest of the gang at Corvette Recycling are top notch vendors.
Hope everything works out and you guys make the event on Saturday.
Nice to hang out with the whole Corvette Recycling gang over the weekend at the NASA Nationals @ MMP
Colton and the rest of the gang at Corvette Recycling are top notch vendors.
Hope everything works out and you guys make the event on Saturday.
Nice to hang out with the whole Corvette Recycling gang over the weekend at the NASA Nationals @ MMP
I never rely on hope...action will get results...maybe I will see you Saturday...if I take enough action before then....
09-15-2009, 10:29 AM
#11
Melting Slicks
I have been accused of poor communication before which I can understand, but procastination and lack of paying attention to details while trying to help every brother and his cousin, is something that I have not yet been accused of..............I work non-stop. Maybe you should call and we could discuss.
I am sure that you will be there you have enough drive.......I hope that Len is putting his stock assy back in, or these things are going to happen again.......With any obvious second failure, something is wrong. Guess what ??? It is not the clutchs fault, and its not Lens fault......I was only trying to help his expense sorry that I didn't get "on it" in someones expected time line. My time line was by the upcoming event. FYI, my car still needs to be fixed too....
Back to your regularly scheduled program
Last edited by RAFTRACER; 09-15-2009 at 10:42 AM.
09-15-2009, 11:01 AM
#12
I have been accused of poor communication before which I can understand, but procastination and lack of paying attention to details while trying to help every brother and his cousin, is something that I have not yet been accused of..............I work non-stop. Maybe you should call and we could discuss.
I am sure that you will be there you have enough drive.......I hope that Len is putting his stock assy back in, or these things are going to happen again.......With any obvious second failure, something is wrong. Guess what ??? It is not the clutchs fault, and its not Lens fault......I was only trying to help his expense sorry that I didn't get "on it" in someones expected time line. My time line was by the upcoming event. FYI, my car still needs to be fixed too....
Back to your regularly scheduled program
I am sure that you will be there you have enough drive.......I hope that Len is putting his stock assy back in, or these things are going to happen again.......With any obvious second failure, something is wrong. Guess what ??? It is not the clutchs fault, and its not Lens fault......I was only trying to help his expense sorry that I didn't get "on it" in someones expected time line. My time line was by the upcoming event. FYI, my car still needs to be fixed too....
Back to your regularly scheduled program
I agree, if this needs to go further we can talk offline.
Sorry to here your car is not up and running. Congrats on the NASA TTU win. Aaron's car looks extreme and you showed what it can do.
09-15-2009, 12:25 PM
#13
Team Owner
09-15-2009, 12:54 PM
#15
Team Owner
09-15-2009, 08:17 PM
#16
Burning Brakes
Member Since: Apr 2005
Location: Cincinnati Ohio
Posts: 901
Likes: 0
Received 0 Likes
on
0 Posts
.......I hope that Len is putting his stock assy back in, or these things are going to happen again.......With any obvious second failure, something is wrong. Guess what ??? It is not the clutchs fault, and its not Lens fault......I was only trying to help his expense sorry that I didn't get "on it" in someones expected time line. My time line was by the upcoming event.....:
Ditto on the congrats for the TT Championship! No doubt you can drive the snot out of a car.
Photon, "Stock" may be replaced by "slow", "fat", "wide" or what I believe has been your favorite view for some time on the track, "pumpkin" ***
Last edited by Webz; 09-16-2009 at 06:43 AM.
09-15-2009, 09:49 PM
#18
Team Owner
09-15-2009, 09:52 PM
#19
Burning Brakes
Member Since: Apr 2005
Location: Cincinnati Ohio
Posts: 901
Likes: 0
Received 0 Likes
on
0 Posts
If the pumpkin wasn't scared before, it sure got religion with Raftracer at the wheel. That is his white helmet behind the yoke, waiting for Slowton to come around to dish-out some harassment.
Last edited by Webz; 09-15-2009 at 09:55 PM.
