FS: 2008 30' Pace Enclosed tag trailer
#1
Racer
Thread Starter
Member Since: Dec 2003
Location: Ft Lauderdale Florida
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
FS: 2008 30' Pace Shadow GT trailer >> $18,500 <<<<<
This is a like new, very very clean, Mint Condition
2008 30’ Pace Daytona Shadow GT
Used less than 3000 actual trailer towing miles
With the “Daytona Package” Upgrades
HOW ABOUT A PACKAGE DEAL with a "Baja Pit Bike" & a "EZ-GO Golf Cart" This trailer is also available bundled with a 2004 EZ-GO Ele Golf Cart ($4500) & a 2008 Baja 50cc Scooter ($800) at an all-together "Package Price" of just $23,000.
Other trailer upgrades & add-ons include:
NOTE: This has the (4) Pace factory installed front a-frame brackets (ONLY) for a load bearing “Tuff-Tow” System, which allows the trailer to be towed with the majority of the trailer’s tongue weight supported by the “Tuff Tows” two wheels.
Tuff Tow's Company's Website here:
https://www.shogunindustries.com/cgi...wsolution.html
TRAILER EQUIPMENT INCLUDES:
1 Shelter Systems' Side Pit Canopy full length -12' x 30'
• 12” x 36” Roof solar panel to maintain 12v house battery
• 5000# Superwinch with CORD & IR Remote
• Aircraft Style tie-down alum strips on walls
• 110v built-in battery charger for trailer's battery
• Door mount fire extinguisher
• Pit Pal door organizer LARGE
• Pit Pal "double" helmet rack
2 Pit Pal ex-wide folding Tire Racks
2 Pit Pal Roll Racing Tape Holders
1 Pit Pay Lg Funnel Holder
1 Pit Pal Vertical Mount Floor Jack Bracket
1 Pit Pal door mounted Hose Bracket
2 110v Turbo Cooling (cabinet mounted) Fans
1 AM/FM/CD/MP3 Stereo System
Front roof vent wired & ready for an AC Unit
2008 30’ Pace Shadow with the “Daytona Package”
(Pace factory trailer specs are as follows)
SIZE: 30’ inside length with a Driver's Side wall mounted workbench, to fit a
7.5’ x 15’ Corvette, 36” x 72” Pit Cart, Pit Bike & a 108” x 54” Golf Cart next to the workbench
HEIGHT
Inside height, floor to ceiling, is 7' 3"
GT Package features plus:
Finished interior package
Upgraded Electrical package
Custom cabinetry
A/C wire and frame
Aluminum door caddy
6" of extra trailer height
500w quartz halogen lights (2)
Generator prep package
Soundproofed generator compartment
Roof vents (2) and D-rings (4)
SIDE DOOR:
“HD” hinge & door latch
ROOF:
Flat 1 piece roof with 2-Roof vents (front vent pre-wired for a roof mount A/C)
CHASSIS:
Steel frame on 12” centers (adds 7 more cross members) w/Undercoating
NOSE:
12” extra long / 54” tongue for motorhome clearance
AXLES:
Triple 6000# axles with 16” Alum wheels
SPARE TIRES:
2 spare Alum 16” wheels & tires,
1 in floor well & 1 on inside front wall w/mount bkt
EXTERIOR: .
050 VHB fastenerless, smooth skin, in White,
Front alum 24” stone guard
INTERIOR:
8’ wide car carrier package,
.030 Alum finished walls
Wall & Ceiling insulation,
3’ high carpet on walls
81.5" OA width between wheel wells
CABINETS:
DS Workbench &
Overhead “L” shape (side & front) cabinets
w/2 - 4’ fluorescent light
12v Battery & battery box recessed in the RF floor
FLOOR:
“Dragster Package” w/twin 6” rear frame rails
ATP beaver tail floor covering
Cross members on closer 12” centers
Recessed spare tire well
Recessed battery box
Black marble floor covering
Rear Ramp Door ATP Hinge Cover
Pit Pal 5' Flip down ramp extensions with anti-skid truck bed liner
D-RINGS:
4 - 5000# SWIVEL D-Rings attached to the steel frame members:
On 18’ F to R centers for a 15’ long Corvette
GENERATOR BOX:
LS Generator box w/slide out & locking door to fit a Honda 3000
with a “30 amp connector plug”
ELECTRICAL:
110v w/50amp ele control box
Wired for a front mounted roof A/C ,
4 - 4’ fluorescent inside lights in center
110v GFI ele boxes; 4 inside, 4 over workbench & 2 outside RS 500w flood lights,
5000# Superwinch in front w/winch reinforcement mounting plate
LED light package w/Directional lights on fenders
12v battery & battery box Recessed in floor
4 - 12v Dome lights
New with all of the included upgrades & Pace options was over $32,000.00
$19,999.00 OBO
Would a price of $18,500.00 bring anybody out of the woods & into the paddock to buy this double throw down deluxe beauty?
Buzz Fyhrie
Cell: 954-612-3606
E-Mail: rcrbuzz@bellsouth.net
Ft Lauderdale, FL 33324
2008 30’ Pace Daytona Shadow GT
Used less than 3000 actual trailer towing miles
With the “Daytona Package” Upgrades
HOW ABOUT A PACKAGE DEAL with a "Baja Pit Bike" & a "EZ-GO Golf Cart" This trailer is also available bundled with a 2004 EZ-GO Ele Golf Cart ($4500) & a 2008 Baja 50cc Scooter ($800) at an all-together "Package Price" of just $23,000.
Other trailer upgrades & add-ons include:
NOTE: This has the (4) Pace factory installed front a-frame brackets (ONLY) for a load bearing “Tuff-Tow” System, which allows the trailer to be towed with the majority of the trailer’s tongue weight supported by the “Tuff Tows” two wheels.
Tuff Tow's Company's Website here:
https://www.shogunindustries.com/cgi...wsolution.html
TRAILER EQUIPMENT INCLUDES:
1 Shelter Systems' Side Pit Canopy full length -12' x 30'
• 12” x 36” Roof solar panel to maintain 12v house battery
• 5000# Superwinch with CORD & IR Remote
• Aircraft Style tie-down alum strips on walls
• 110v built-in battery charger for trailer's battery
• Door mount fire extinguisher
• Pit Pal door organizer LARGE
• Pit Pal "double" helmet rack
2 Pit Pal ex-wide folding Tire Racks
2 Pit Pal Roll Racing Tape Holders
1 Pit Pay Lg Funnel Holder
1 Pit Pal Vertical Mount Floor Jack Bracket
1 Pit Pal door mounted Hose Bracket
2 110v Turbo Cooling (cabinet mounted) Fans
1 AM/FM/CD/MP3 Stereo System
Front roof vent wired & ready for an AC Unit
2008 30’ Pace Shadow with the “Daytona Package”
(Pace factory trailer specs are as follows)
SIZE: 30’ inside length with a Driver's Side wall mounted workbench, to fit a
7.5’ x 15’ Corvette, 36” x 72” Pit Cart, Pit Bike & a 108” x 54” Golf Cart next to the workbench
HEIGHT
Inside height, floor to ceiling, is 7' 3"
GT Package features plus:
Finished interior package
Upgraded Electrical package
Custom cabinetry
A/C wire and frame
Aluminum door caddy
6" of extra trailer height
500w quartz halogen lights (2)
Generator prep package
Soundproofed generator compartment
Roof vents (2) and D-rings (4)
SIDE DOOR:
“HD” hinge & door latch
ROOF:
Flat 1 piece roof with 2-Roof vents (front vent pre-wired for a roof mount A/C)
CHASSIS:
Steel frame on 12” centers (adds 7 more cross members) w/Undercoating
NOSE:
12” extra long / 54” tongue for motorhome clearance
AXLES:
Triple 6000# axles with 16” Alum wheels
SPARE TIRES:
2 spare Alum 16” wheels & tires,
1 in floor well & 1 on inside front wall w/mount bkt
EXTERIOR: .
050 VHB fastenerless, smooth skin, in White,
Front alum 24” stone guard
INTERIOR:
8’ wide car carrier package,
.030 Alum finished walls
Wall & Ceiling insulation,
3’ high carpet on walls
81.5" OA width between wheel wells
CABINETS:
DS Workbench &
Overhead “L” shape (side & front) cabinets
w/2 - 4’ fluorescent light
12v Battery & battery box recessed in the RF floor
FLOOR:
“Dragster Package” w/twin 6” rear frame rails
ATP beaver tail floor covering
Cross members on closer 12” centers
Recessed spare tire well
Recessed battery box
Black marble floor covering
Rear Ramp Door ATP Hinge Cover
Pit Pal 5' Flip down ramp extensions with anti-skid truck bed liner
D-RINGS:
4 - 5000# SWIVEL D-Rings attached to the steel frame members:
On 18’ F to R centers for a 15’ long Corvette
GENERATOR BOX:
LS Generator box w/slide out & locking door to fit a Honda 3000
with a “30 amp connector plug”
ELECTRICAL:
110v w/50amp ele control box
Wired for a front mounted roof A/C ,
4 - 4’ fluorescent inside lights in center
110v GFI ele boxes; 4 inside, 4 over workbench & 2 outside RS 500w flood lights,
5000# Superwinch in front w/winch reinforcement mounting plate
LED light package w/Directional lights on fenders
12v battery & battery box Recessed in floor
4 - 12v Dome lights
New with all of the included upgrades & Pace options was over $32,000.00
$19,999.00 OBO
Would a price of $18,500.00 bring anybody out of the woods & into the paddock to buy this double throw down deluxe beauty?
Buzz Fyhrie
Cell: 954-612-3606
E-Mail: rcrbuzz@bellsouth.net
Ft Lauderdale, FL 33324
Last edited by Racer Buzz; 11-06-2010 at 10:30 AM.
#5
Advanced
Member Since: Sep 2000
Location: Pembroke Pines, FL, USA
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Buzz, you cant possibly expect me to buy every trailer that you sell! Although, I am still making good use of the last one. Are you still over by the Marina? Best of luck on the sale! By the way, to all that are interested, Buzz is a great guy to do business with.
Mark
Mark
#6
Team Owner
#7
Le Mans Master
#9
Racer
Thread Starter
Member Since: Dec 2003
Location: Ft Lauderdale Florida
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
#10
Racer
Thread Starter
Member Since: Dec 2003
Location: Ft Lauderdale Florida
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
Buy yourself that really special Christmas Gift
Bumped for another chance for YOU to review and then buy yourself that really special Christmas Gift.... this sweetheart of a totally prepped and setup Pace trailer, not likely anyone else will!! Call me!!!
#12
Racer
Thread Starter
Member Since: Dec 2003
Location: Ft Lauderdale Florida
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
What better way to start off the new 2010 racing season
What better way to start off the all new 2010 Corvette racing season than to treat yourself and your Corvette to the Perfect Race Car Trailer.
Take care of your prized Corvette and transport it in style.
Call me.
Take care of your prized Corvette and transport it in style.
Call me.
#16
Racer
Thread Starter
Member Since: Dec 2003
Location: Ft Lauderdale Florida
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
Yes, but you'll need to stack them or drive them into the trailer real fast!
Otherwise you would need to remove the front workbench / cabinets and then it would probably be too tight of a fit to tie them down properly.
Otherwise you would need to remove the front workbench / cabinets and then it would probably be too tight of a fit to tie them down properly.
#18
Intermediate
Member Since: Feb 2001
Location: Syracuse, NY, USA
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
30' trailer
I am interested in what your inside measurement is for width. I have a Vintage GT-1 tube frame Corvette that is wide. Let me know what your available width is so I can be assured the car would fit.
Is the winch included?? Does it have wireless controls or if wired--how long is the wire??
With the pictures provided, I see a tire rack--is that included as well??
More questions to follow--once I know the car will fit.
Is the winch included?? Does it have wireless controls or if wired--how long is the wire??
With the pictures provided, I see a tire rack--is that included as well??
More questions to follow--once I know the car will fit.
#19
Racer
Thread Starter
Member Since: Dec 2003
Location: Ft Lauderdale Florida
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
I am interested in what your inside measurement is for width. I have a Vintage GT-1 tube frame Corvette that is wide. Let me know what your available width is so I can be assured the car would fit.
Is the winch included?? Does it have wireless controls or if wired--how long is the wire??
With the pictures provided, I see a tire rack--is that included as well??
More questions to follow--once I know the car will fit.
Is the winch included?? Does it have wireless controls or if wired--how long is the wire??
With the pictures provided, I see a tire rack--is that included as well??
More questions to follow--once I know the car will fit.
Trailer interior width is 8'. I believe the inside width between the inner wheel-wells is 6' 9". I will get an exact measurement. My C5 Corvette, with fat Michelin tires and flares, has at least 2" on each side, tires to wheel-wells with 12" wide fronts & 13" wide rear tires. Can't get much wider with any make trailer as far as I know unless you build a ramp to go OVER the wheel-wells.
5000# rated, top of the line, SuperWinch is included.
25' manual cord is included.
IR key fob remote control might be available.
Two adjustable width, fold flat, tire racks, each holds 4 tires mounted w/wheels are included.
BUZZ
#20
Racer
Thread Starter
Member Since: Dec 2003
Location: Ft Lauderdale Florida
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
I am interested in what your inside measurement is for width. I have a Vintage GT-1 tube frame Corvette that is wide. Let me know what your available width is so I can be assured the car would fit.
Is the winch included?? Does it have wireless controls or if wired--how long is the wire??
With the pictures provided, I see a tire rack--is that included as well??
More questions to follow--once I know the car will fit.
Is the winch included?? Does it have wireless controls or if wired--how long is the wire??
With the pictures provided, I see a tire rack--is that included as well??
More questions to follow--once I know the car will fit.