CCW C10's and Hoosier R6's FS
03-10-2010, 10:18 PM
#4
Burning Brakes
Any interest in selling them without the Hoosiers? I am going to buy the exact same rim set up but will be running only street rubber on the rims so I don't have a use for the R6's. If someone else was interested in just the tires would you split them up?
Also I am curious about how they looked on your car...Any pictures? I will be getting C10's 18X11 front and 18X13 rears but don't know what finish I want to go quite yet and I am STRONGLY leaning twords your finish. With that finish I am guessing it hides swirl marks that might otherwise appear on a polished or powdercoated black setup? How well does it hide brake dust?
Even if you don't want to part them up here's a bump for a GREAT looking set of wheels and tires!!!
Also I am curious about how they looked on your car...Any pictures? I will be getting C10's 18X11 front and 18X13 rears but don't know what finish I want to go quite yet and I am STRONGLY leaning twords your finish. With that finish I am guessing it hides swirl marks that might otherwise appear on a polished or powdercoated black setup? How well does it hide brake dust?
Even if you don't want to part them up here's a bump for a GREAT looking set of wheels and tires!!!
03-10-2010, 10:37 PM
#6
Melting Slicks
Thread Starter
Any interest in selling them without the Hoosiers? I am going to buy the exact same rim set up but will be running only street rubber on the rims so I don't have a use for the R6's. If someone else was interested in just the tires would you split them up?
Also I am curious about how they looked on your car...Any pictures? I will be getting C10's 18X11 front and 18X13 rears but don't know what finish I want to go quite yet and I am STRONGLY leaning twords your finish. With that finish I am guessing it hides swirl marks that might otherwise appear on a polished or powdercoated black setup? How well does it hide brake dust?
Even if you don't want to part them up here's a bump for a GREAT looking set of wheels and tires!!!
Also I am curious about how they looked on your car...Any pictures? I will be getting C10's 18X11 front and 18X13 rears but don't know what finish I want to go quite yet and I am STRONGLY leaning twords your finish. With that finish I am guessing it hides swirl marks that might otherwise appear on a polished or powdercoated black setup? How well does it hide brake dust?
Even if you don't want to part them up here's a bump for a GREAT looking set of wheels and tires!!!
Here is the DRM car sporting them:
03-11-2010, 12:22 AM
#7
Burning Brakes
Oh VERY cool. Derek I am going to go with the C10's in this finish. However I forgot we need to get a different backspacing on the wheels. I will have to just order them new from CCW. We are going to mini tub the car to try and keep the wheelbase as close to stock as possible but still have big tires on the rear.
Good luck selling this setup though...Sure looks GREAT!
Good luck selling this setup though...Sure looks GREAT!
03-15-2010, 11:09 AM
#14
Burning Brakes
I don't have any pics as they were only on the car for about 15 minutes. With this finish (CCW's most expensive finish) there are no swirl marks to hide, and you can't see any brake dust. The pics are taken with carbotech XP12/10 dust on the wheels, I probably should have cleaned them before taking the pics. PM on the way.
Here is the DRM car sporting them:
Here is the DRM car sporting them:
