New Hood from LG Motorsports
10-26-2010, 09:08 PM
#1
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2001
Location: Dallas Tx
Posts: 8,392
Received 571 Likes
on
292 Posts
St. Jude Vendor Donor '03-'04-'05-'06-'07-'08-'09-'10-'11
New Hood from LG Motorsports
Hi Guys,
We have quite a few new products coming out this spring. THis is our new hood. It is the 3 louver version of our original center louver hood.
It should be available in early spring and we also plan on a carbon fiber version.
Our race team may not be running a full season this year so you can expect me to "channel" my racing ideas into products for your street and track Corvettes.
If you need it for your Corvette, we have it.
Thanks
Lou Gigliotti #28
We have quite a few new products coming out this spring. THis is our new hood. It is the 3 louver version of our original center louver hood.
It should be available in early spring and we also plan on a carbon fiber version.
Our race team may not be running a full season this year so you can expect me to "channel" my racing ideas into products for your street and track Corvettes.
If you need it for your Corvette, we have it.
Thanks
Lou Gigliotti #28
__________________
LG Pro LT Headers, MOST HP, MOST TORQUE
http://lgmotorsports.com/gallery/alb...no_compare.jpg
LGM http://www.LGMotorsports.com
Winner Daytona 250
22 WC Wins
"Most powerful Corvette headers on the planet"
LG Pro LT Headers, MOST HP, MOST TORQUE
http://lgmotorsports.com/gallery/alb...no_compare.jpg
LGM http://www.LGMotorsports.com
Winner Daytona 250
22 WC Wins
"Most powerful Corvette headers on the planet"
Last edited by LG Motorsports; 06-14-2011 at 05:36 PM.
10-27-2010, 07:10 AM
#4
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2001
Location: Dallas Tx
Posts: 8,392
Received 571 Likes
on
292 Posts
St. Jude Vendor Donor '03-'04-'05-'06-'07-'08-'09-'10-'11
2011 racing season is still up in the air. We are talking with a couple of potential team mates but as you all know, in this economy, sponsors are few and far between.
And the ROlex Series, on a modest budget will run around $800k to a Million.
There is a possibility that we will do the Rolex 24 but beyond that, it is up in the air.
Thanks
LouG
Hood For the C5 may be coming later but we are focused on the C6 version right now. LG
And the ROlex Series, on a modest budget will run around $800k to a Million.
There is a possibility that we will do the Rolex 24 but beyond that, it is up in the air.
Thanks
LouG
Hood For the C5 may be coming later but we are focused on the C6 version right now. LG
10-27-2010, 01:14 PM
#9
Race Director
10-27-2010, 01:14 PM
#10
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2001
Location: Dallas Tx
Posts: 8,392
Received 571 Likes
on
292 Posts
St. Jude Vendor Donor '03-'04-'05-'06-'07-'08-'09-'10-'11
I will check,
keep in mind that we will be producing this in a full carbon and carbon/glass also, and for racing, we can delete the inner ribs and really lighten it like we did on our Rolex Car and it only weighed 9 pounds that way.
LG
keep in mind that we will be producing this in a full carbon and carbon/glass also, and for racing, we can delete the inner ribs and really lighten it like we did on our Rolex Car and it only weighed 9 pounds that way.
LG
10-27-2010, 09:20 PM
#13
Premium Supporting Vendor
Thread Starter
Member Since: Oct 2001
Location: Dallas Tx
Posts: 8,392
Received 571 Likes
on
292 Posts
St. Jude Vendor Donor '03-'04-'05-'06-'07-'08-'09-'10-'11
we don't know the price yet. It will be competitively priced for sure.
We have been trying to be well inside the price range on as many new products as we can. Our Drop spindles are now almost half price from the original because we paid for tooling to have the parts extruded to cut waste and extra machining costs.
Thanks
Lou G
We have been trying to be well inside the price range on as many new products as we can. Our Drop spindles are now almost half price from the original because we paid for tooling to have the parts extruded to cut waste and extra machining costs.
Thanks
Lou G
10-27-2010, 11:29 PM
#14
Race Director
