PFADT carbon fiber drive shaft instal question
#1
Safety Car
Thread Starter
PFADT carbon fiber drive shaft instal question
Anyone who has installed one please take a look
http://forums.corvetteforum.com/c5-f...-question.html
http://forums.corvetteforum.com/c5-f...-question.html
#2
Race Director
Anyone who has installed one please take a look
http://forums.corvetteforum.com/c5-f...-question.html
http://forums.corvetteforum.com/c5-f...-question.html
No help here, but thinking some variations from one MY to the next.
Bump for some help.
#3
Safety Car
Thread Starter
mine is a 2004 A4...
After a little more digging, A4s have 10mm bolts. PFADT send studs that are 12mm. Question is do they have the 10mm for the A4 or do they drill and tap to the 12mm. Why does this stuff always happen on the weekends when you can't get anyone on the phone
After a little more digging, A4s have 10mm bolts. PFADT send studs that are 12mm. Question is do they have the 10mm for the A4 or do they drill and tap to the 12mm. Why does this stuff always happen on the weekends when you can't get anyone on the phone
Last edited by Mike04; 03-26-2011 at 04:41 PM.