Wanted: BBS race wheels
#1
Tech Contributor
Thread Starter
Wanted: BBS race wheels
Gentlemen,
We are searching for a set of four (4) BBS 3-piece (20-bolt) race wheels, in 16" or 17" diameter. Hoping to find 11" or 12" width, but could modify 9"s or 10"s if necessary.
Anyone who has "graduated" to 18" or 19" diameters have a set of these lying around the garage?
Thanks,
Ed LoPresti
We are searching for a set of four (4) BBS 3-piece (20-bolt) race wheels, in 16" or 17" diameter. Hoping to find 11" or 12" width, but could modify 9"s or 10"s if necessary.
Anyone who has "graduated" to 18" or 19" diameters have a set of these lying around the garage?
Thanks,
Ed LoPresti
#3
Tech Contributor
Thread Starter
Renewing search
Renewing our search for a set of used BBS 3-piece, 20-bolt racing wheels. (NOT the LM model street wheel.)
Hoping to find some combination of 11" or 12" widths, in 16" or 17" diameters. Let us know what you have.
Thanks,
Ed
Hoping to find some combination of 11" or 12" widths, in 16" or 17" diameters. Let us know what you have.
Thanks,
Ed
#4
Tech Contributor
Thread Starter
We may have located a PAIR that will work - waiting to hear specific measurements.
Meanwhile, anyone else? How about anyone else with just a pair of these wheels? (1 pair + 1 pair = . . . . . )
Thanks,
Ed
Meanwhile, anyone else? How about anyone else with just a pair of these wheels? (1 pair + 1 pair = . . . . . )
Thanks,
Ed
#5
Safety Car
Contact these guys, http://www.bobwoodmantires.com/bwtrims.php probably the largest inventory of used BBS rims in the country.
#6
Team Owner
Member Since: Sep 2003
Location: Raleigh / Rolesville NC
Posts: 43,084
Likes: 0
Received 24 Likes
on
24 Posts
Contact these guys, http://www.bobwoodmantires.com/bwtrims.php probably the largest inventory of used BBS rims in the country.
#7
Tech Contributor
Thread Starter
Keith & Tom,
Thanks for the reminder! I have spoken with Evan at Woodman's in the past, and can not recall if I owed him a call back, or he owed it to me. Either way, I have just left them another message, and will follow-up.
Of course, what I am truly hoping is to find someone who has a set of these collecting dust in their garage.
Ed
Thanks for the reminder! I have spoken with Evan at Woodman's in the past, and can not recall if I owed him a call back, or he owed it to me. Either way, I have just left them another message, and will follow-up.
Of course, what I am truly hoping is to find someone who has a set of these collecting dust in their garage.
Ed
#8
Former Vendor
These wheels were never really popular on these cars. we had a set of non LM wheels, and we couldnt give them away.
I have some centerlock 16" Trans Am wheels, if you are interested, but I believe you are looking for 5 lug wheels.
I have some centerlock 16" Trans Am wheels, if you are interested, but I believe you are looking for 5 lug wheels.
#9
Tech Contributor
Thread Starter
Where were you when I needed you??
As you know, so much of the wheel market, even for race wheels, continues to be driven by popularity, rather than by true performance. It continues to surprise me.
We are indeed looking for the 5-lug (5 on 120) configuration, E26 centers. UNLESS, of course, center-lock conversion hubs, for a C4, come with those 16" TransAm wheels you have.
Regards,
Ed
#14
Tech Contributor
Thread Starter
Everett,
Thanks for the reply, and I shall certainly keep those in mind if we eventually decide to go the larger diameter route. Unfortunately, right now we need that "next smaller" center that is the base for the 16" and 17" wheel.
As luck would have it, I have located 3 of the proper E26 center sections, but you can see where that will leave us. Obviously, would much prefer to find a full set, already assembled, in the specified sizes.
If I recall correctly, you are running BIG wheels - why don't you buy some rims and barrels, and use the centers?
Ed
Thanks for the reply, and I shall certainly keep those in mind if we eventually decide to go the larger diameter route. Unfortunately, right now we need that "next smaller" center that is the base for the 16" and 17" wheel.
As luck would have it, I have located 3 of the proper E26 center sections, but you can see where that will leave us. Obviously, would much prefer to find a full set, already assembled, in the specified sizes.
If I recall correctly, you are running BIG wheels - why don't you buy some rims and barrels, and use the centers?
Ed
#15
Melting Slicks
Everett,
Thanks for the reply, and I shall certainly keep those in mind if we eventually decide to go the larger diameter route. Unfortunately, right now we need that "next smaller" center that is the base for the 16" and 17" wheel.
As luck would have it, I have located 3 of the proper E26 center sections, but you can see where that will leave us. Obviously, would much prefer to find a full set, already assembled, in the specified sizes.
If I recall correctly, you are running BIG wheels - why don't you buy some rims and barrels, and use the centers?
Ed
Thanks for the reply, and I shall certainly keep those in mind if we eventually decide to go the larger diameter route. Unfortunately, right now we need that "next smaller" center that is the base for the 16" and 17" wheel.
As luck would have it, I have located 3 of the proper E26 center sections, but you can see where that will leave us. Obviously, would much prefer to find a full set, already assembled, in the specified sizes.
If I recall correctly, you are running BIG wheels - why don't you buy some rims and barrels, and use the centers?
Ed