When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
wheel width and offset/backspace? I assume the rears are 11.5" since you're saying no tubbing required and you're fitting a 335 on them?
Its the standard CCW track package offset that everyone uses. If you have the Z06 rear brake ducts, they will need to come out or they can rub on full compression.
I have lots of interest to break up the rims / tires but looking for a single buyer for the whole shabang.
Its a great deal if you do the math. 16 tires and rims at this price, less than just he cost of the rims new. Car sold. Trailer sold. Most of the brake, etc sold. Just need these gone, preferably by winter so i can get my snow blower out easier
I would be interested in the 4 wheels not the tires. CCW used many widths & backspaces for C5. Straight edge across back side of wheel & measure to hub surface would give us back spacing.
10-12-2011, 05:38 PM
