Fartpipe

I put all of these parts up in the C5 parts section.
Located in York, Pa. 17406
email- ecurb3@comcast.net

Parts came off a 2004 C5Z06 with 30k miles total on it.

Hinged front C5 tow hook $50.00 plus shipping/paypal






Halltech Trap intake system with Blue License plate tunnel port (screened license plate from halltech)
$200.00 plus shipping/paypal

RogerT

Will your rotors and calipers fit 17" wheels?
How severe are the brake pads?

Roger T

yooper

CeeFiveZee

Interested in the Wilwood calipers.These work with the stock front rotors, correct?

Fartpipe

The calipers fit on stock C5 rotors as thats what I have on the car. They fit with my stock C5Z06 17in front wheels.

*just remembered the car had thin spacers on there. Not sure if they were needed to clear the calipers. I'll check with the previous owner about the spacers if needed for calipers or no.

BossV8

Interested in the accupump, and the trans/diff cooler.
I send you a pm.

vms4evr

------> QA1 sway bar endlinks adjustable. (4) total brand new in the box. $80.00 plus shipping/paypal.

I'll take these, PM me your Paypal info.

Fartpipe

Replied and they will be yours. PM replied to. Thank you


Bruce

RDnomorecobra

how many miles would you say are on those wilwoods?

CeeFiveZee

You have a PM on the calipers. Thanks

Fartpipe

The wilwoods are pending sale once I get a shipping quote to CA. Sold to Dave... not sure of his forum name. I have 4 back ups after him that want them. I'm not 100% sure of the mileage but I do know they are not leaking, they were braking amazingly compared to stock calipers when I took them off this past wednesday. WOW!! What a difference in braking they make. I put the stock calipers/lines on the car and almost felt sad with the first time braking with them.

More pictures to come tonight. Thank you to the overwhelming response so quickly on most items. If i'm off on price on anything please tell me. I wont be offended. However that doesnt mean low ball I know almost all my prices are less than half of what it would cost new.


Bruce

BossV8

Did you get my PM ?
Interested in the cooler but need to know which model and if it is good working condition.

Thanks.

Fartpipe

I did get your PM but it appears they are sold/pending right now. i didnt know the numbers and was going to have to wait until they came out tonight to be sure which numbers. You would be 3rd in line for them if you wanted them at this point for those confirming they want them for sure.

I'm sorry if I have delayed in getting back to anyone. I"m trying my best to keep up. I have 15 emails and 20 PM's on the parts and most of them were for the Wilwood brakes, DRM trans/diff coolers, QA1 endlinks, 1 PM for the Accusump system and 1 PM for the harness bars.

BossV8

Okay I'll wait my turn then.
Thanks.

VGLNTE1

Can I see a pic of the rd harness bar please

VGLNTE1

Also, do you have the harness belts for the bars?

Fartpipe

I'll get a couple pics of the R-D harness bar. I have 2 sets of harness. 1 set is camlock and the other set is your standard latch. THey are dated for I think 2004 though.

Fartpipe

BossV8 the Accusump could be yours if you're ready? The trans/diff coolers are pending.

BossV8

Sorry I won't do the accusump. But ready for the trans/diff cooler.

Fartpipe

I have a pair (2) belts G-Force look like camlock style.

I have the sub harness bars, side belt attachments for the seat. All picture here. I need to get the down bars for the Brey Krause Harness bar yet.