bobmoore2

SOLD. The buyers responded very quickly on these items.



one Sparco EVO 2 Plus Racing Seat
Similar to the current model EVO L (http://www.saferacer.com/sparco-evo-...?productid=773)
Very supportive. Includes a hole in the seat bottom for a 5 or 6-point racing harness.
Almost New condition (no fading, no rubbing wear spots, very slight scratches on the back from touching a cement floor.)
paid $779 two years ago. Will sell for $200.

Custom Racing seat mounting brackets (one set for one seat)
Custom made to allow mounting a Sparco EVO 2 Plus Racing Seat to the Corvette C6 6-way power seat base. This allows the seat to move forward & backward, and up & down in front and in back using the mechanism in the power seat base.
$50

Pic 1 of the seat


Pic 2 of the seat


Pic 3 of the seat


Pic 4 of the seat


Pic 5 – bottom of the seat and the mounting brackets


Pic 6 – bottom of the seat and the mounting brackets



 

one set Schroth Profi II 6-Point Camlock Racing Harness (http://www.saferacer.com/schroth-pro...productid=2150)
FIA certified. The kind of harness used by professional race drivers worldwide.
Comes with two sets of “sub” straps (one set is 6 inches longer than normal for installation using the Corvette 6-way power seat base)
As New condition (no fading, no scratches, no rubbing wear spots, etc.)
Good for use through 2015 (per racing organization regulations and the tags on the harness)
$100

One VetteWorks Hardbar “Sub Belts” Mounting Bracket (http://www.vetteworksonline.com/cata...roducts_id=147)
Allows mounting a 6-point racing harness in any C6 or C5 Corvette.
$30

Pic 1 of the Racing Harness and Hardbar


Pic 2 of the Racing Harness and Hardbar


Pic 3 - the Use Date Tag on the Racing Harness


Pic 4 - one of the FIA certifications Tag on the Racing Harness


Pic 5 – all the necessary mounting hardware


 

One Accusump complete kit for mounting into a C6 Corvette.
Includes all the hoses and electrical hardware needed to install an Accusump system into your C6 Corvette.
Excellent condition. (The accumulator tank is still holding 20 lbs air pressure even after being disconnected for over a year.)
$75

Pic 1 of the Accusump, including the hose, the valve, , the mounting hardware, and the electrical hardware


Pic 2 of the Accusump, showing the pressure meter indicationg about 20 psi air pressure still in the tank bladder

JDIllon

I will take the Harness and Hardbar Bracket. E-mail sent JD

72Vega

Emails sent

racer313g

I'll take the accusump. Pm me the payment details.

Thanks

Sidney004

PM sent

bobmoore2

JDillon got the harness and Hardbar.

72Vega probably will get the seat and mounting brackets. (There is a question whether he will still want the seat when he can't have the harness also. I'll give him a couple days to respond.) If 72Vega doesn't want the seat without the harness, then sheshnwoody will get the seat and brackets. (He was the second person to ask for them.)

Sgt.Gator got the accusump.

Some of these buy offers came in the form of emails only, so you can't see them here. I accepted them in the order they were received as the Forum rules say I should.

zyousoon

Son of a!!!!!! I"ve been waiting for a seat and bracket to come up. If buyer backs out please let me know.

ERND IT

PM sent on the seat and brackets as well

taken19

Do you have one or two harnesses? If you have one still available, I am interested. Please let me know.

bobmoore2

You're way down the list. (I got a couple requests via email also.)

bobmoore2

I only have the one harness (enough for one seat). And it is sold now...

taken19

Ok, thanks for letting me know. Great prices on the stuff BTW, no wonder it sold so fast.

bobmoore2

All of the items have been shipped.

If you are one of the buyers, check your email for shipping and payment info.

If you asked to buy a little too late, then keep looking. There are lots more great offers on the Forum.