Autocrossing & Roadracing Suspension Setup for Track Corvettes, Camber/Caster Adjustments, R-Compound Tires, Race Slicks, Tips on Driving Technique, Events, Results
Sponsored by:
Sponsored by:

Seat/Harness Advice

Thread Tools
 
Search this Thread
 
Old 10-15-2012, 07:26 PM
  #1  
paulrom
Instructor
Thread Starter
 
paulrom's Avatar
 
Member Since: Feb 2008
Location: Richmond, VA
Posts: 110
Received 48 Likes on 11 Posts

Default Seat/Harness Advice

After 3 years of sliding around on my stock seats and CG-Lock seat belt tensioner, I am finally ready to upgrade to a race seat for my 08 Z06. I am looking at a Hardbar lap belt bar and harness bar along with an Evo 2 plus seat (I am 6'2 and 235). Based on your experience does this sound like a good set up or do you have any other suggestions? I do about 10-12 track days per year and only use the car sparingly otherwise. Probably 90% of the miles on the car are track miles. Any suggestions, tips or pitfalls to avoid would be appreciated. This will be my first winter project (brakes and brake cooling to follow).
Thanks
Old 10-15-2012, 08:01 PM
  #2  
JDIllon
Melting Slicks
 
JDIllon's Avatar
 
Member Since: Sep 2005
Location: Port St. Lucie Fl.
Posts: 2,713
Received 297 Likes on 78 Posts

Default

You will be very happy with that setup! If you have head room problems? just tilting the seat a little should help. JD



Quick Reply: Seat/Harness Advice



All times are GMT -4. The time now is 01:49 AM.